Инструкция по эксплуатации Bosch Praesideo 4.0
Страница 73
Praesideo 4.0
en | 83
Bosch Security Systems B.V.
IUI-PRAESIDEO_4.0 | V1.0 | 2013.01
Installation and User Instructions
Clause / Requirement
Compliance
Signature
15 Marking
Praesideo is compliant.
The VACIE shall be marked with the following
information, which shall be legible at access level 1:
a
the number of this European Standard;
The installer must mark the Praesideo system with the
number of this European standard (which is legible at
access level 1) since the installer must install and
configure the system properly in order to let the
installation comply with this standard.
b
the name or trademark of the manufacturer or
supplier;
The name ‘Bosch’ is visible on each element of the
Praesideo system. The installer must ensure that this
name is legible at access level 1 for all system elements.
c
the type number or other designation of the VACIE.
The type number of each unit of the Praesideo system is
present on the unit itself. The installer imust ensure that
this type number is legible at access level 1.
It shall be possible to identify a code or number that
identifies the production period of the VACIE at access
level 1 or 2 or 3.
The hardware version and production data are visible on
the type number plate of each unit of the Praesideo
system. The installer must ensure that this type number
plate is identifiable at access level 1, 2 or 3.
Where Annex ZA.3 covers the same requirements as
this clause, the requirements of this clause are met.
Clause / Requirement
Compliance
Signature
16 Tests
All tests as asked for in the clauses of section 16 have
been carried out by an accredited certification body for
EN54-16 compliancy.
The Praesideo system has been found compliant to
EN-54-16 and received a certification of compliancy.