Bosch Praesideo 4.0 - Инструкция (Страница 64)

Praesideo 4.0 en | 74
Bosch Security Systems B.V. IUI-PRAESIDEO_4.0 | V1.0 | 2013.01 Installation and User Instructions
13.6 Accessibility of indications and controls Praesideo is compliant.
Four access levels shall be provided on the VACIE, from
access level 1 (most accessible) to access level 4 (least
accessible). Manual controls at a given access level shall
not be accessible at a lower access level.The following
shall apply:
The Praesideo system offers three types of user
accounts (with different access rights):
• User: user account type that offers operational
control of the system; meant for operational
users of the Praesideo system;
• Installer: user account type that offers
operational control, configuration and diagnosis
of the Praesideo system; meant for installers
and/or configurators of the Praesideo system;
• Administrator: user account type that offers full
control of the system including user
management, i.e. the ability to add and delete
user accounts.
Access level 1 is intended for operational users of the
Praesideo system. It provides direct (unrestricted)
operational access to the Praesideo system via:
• A call station that does not have access control
(call station keys)
Access level 2 is intended for operational users of the
Praesideo system. It provides operational access to the
system after (some form of) identification. The Praesideo
system enforces logical identification for the following
access points:
• A call station with access control (via numeric
keypad); a pin code must be entered before the
call station can be used
• The open interface; a username and password
are needed to connect to the Praesideo system
via the Open Interface); the user of the Open
Interface must at least have a user account of
type ‘user’ (i.e. user, installer or administrator
access rights)
Note that access level 2 can also be enforced for the access
level 1 access points by means of physical access control,
which restricts access to persons that possess the physical
access device (e.g. key, access card, et cetera).
This is applicable for:
• Input contacts with physical access control; the
system components offering the input contacts
are located in a room/cabinet that is not generally
accessible
• The front panel menu (with physical access
control); the system components that have a
front panel menu are located in a room/cabinet
that is not generally accessible
• A call station with physical access control; the
call station is located in a room/cabinet that is not
generally accessible
Access level 3 is intended for installers and/or
configurators of the Praesideo system. It provides
access for configuration and diagnosis of the Praesideo
system after logical and/or physical identification. This
level of access is offered through:
• The web interface offered by the web server of
the network controller. A user name and
password need to be provided to get access to
this web interface. The user must have at least a
user account of type ‘installer’ (i.e. Installer or
administrator access rights). The web interface
can be used for configuration and logical
diagnosis of the system.
• Physical access control by means of installing
the system elements in a restricted environment,
such as placing the 19”-units in a 19”-rack with
key lock. This type of access can be used for
physical diagnosis of the system, e.g. inspect
interconnections.
Access level 4 is intended for maintenance personnel of the
Praesideo system. It provides software/firmware upgrade of
the Praesideo system components after logical
identification. This level of access is offered through:
• The file transfer application of the Praesideo
system to transfer message sets to the network
controller and upgrade the system software. A
user name and password is needed to be able to
use the File Transfer Application and get access
to the network controller. The user must have at
least a user account of type ‘Installer’ (i.e.
installer or administrator access rights).
Clause / Requirement Compliance Signature