Bosch Praesideo 4.0 - Инструкция (Страница 45)

Praesideo 4.0 en | 55
Bosch Security Systems B.V. IUI-PRAESIDEO_4.0 | V1.0 | 2013.01 Installation and User Instructions
Clause / Requirement Compliance Signature
6 The quiescent condition
Any kind of system information may be displayed during
the quiescent condition. However, no indications shall be
given which could be confused with indications used in
the
Praesideo is compliant.
• voice alarm condition, If the Praesideo system enters the voice alarm condition
each call station will show a red system status LED and
the emergency menu will pop up on the display of the
network controller. In the quiescent condition no red
indicators are used at all and the display of the network
controller will never automatically switch to the
emergency menu.
• fault warning condition, If the Praesideo system enters the fault warning
condition each call station will show a yellow (blinking or
on) power/fault LED and the faults menu will pop up on
the display of the network controller. In the quiescent
condition the power/fault LED of each call station will be
green and the display of the network controller will never
automatically switch to the faults menu.
• disablement condition (option with requirements). The disablement condition is not implemented in
Praesideo.