Detailed settings for the voices [voice setting, Setting the touch sensitivity [touchsense, See the procedure on page 71 – Инструкция по эксплуатации Yamaha CLP-295GP
Страница 82: Clp-295gp руководство пользователя, Действия см. на стр 71, Detailed settings, Setting range: –12 - +12 db, Диапазон установок: -12 - +12 дб, В режиме dual
82
CLP-295GP Руководство пользователя
настройка низкочастотного диапазона
(величина повышаемого/понижаемого
уровня) эквалайзера [EQ LowGain]
Действия см. на стр 71.
82
CLP-295GP Owner’s Manual
Detailed Settings
Detailed settings for the voices [VOICE SETTING]
See the procedure on page 71.
Setting range:
–12 - +12 dB
See the procedure on page 71.
Setting range:
500 Hz - 16.0 kHz
See the procedure on page 71.
Setting range:
–12 - +12 dB
This parameter enables determines the manner
and degree to which the volume level changes in
response to your touch on the keyboard (how hard
you play). Since the volume level of the harpsi-
chords and pipe organs do not change regardless of
how you play the keyboard, the normal setting for
these voices is 127. (See the setting range below.)
See the procedure on page 71.
In Dual mode:
Setting range:
0 (softest) - 64 (largest changes in the level) - 127 (loud-
est and fixed)
Adjusting the low-range gain
(amount of boost/cut) of the equal-
izer* [EQ LowGain]
Adjusting the high-range frequency
of the equalizer*
[EQ HighFreq. (EQ H.Freq)]
Adjusting the high-range gain
(amount of boost/cut) of the equal-
izer* [EQ HighGain]
B
D
NO
YES
A
C
Main Set?-->
EQ LowGain 0
B
D
NO
YES
A
C
Main Set?-->
EQ HighFreq. 500
B
D
NO
YES
A
C
Main Set?-->
EQ HighGain 0
Setting the touch sensitivity
[TouchSense]*
B
D
NO
YES
A
C
Main Set?-->
TouchSense 64
B
D
NO
YES
A
C
MainxLayer Set?-->
TouchSense(GrndPno1) 64
Voice for editing (Voice 1 or Voice 2)
диапазон установок:
-12 - +12 дБ
настройка высокочастотного диапазона
эквалайзера [EQ HighFreq. (EQ H.Freq)]
Действия см. на стр 71.
82
CLP-295GP Owner’s Manual
Detailed Settings
Detailed settings for the voices [VOICE SETTING]
See the procedure on page 71.
Setting range:
–12 - +12 dB
See the procedure on page 71.
Setting range:
500 Hz - 16.0 kHz
See the procedure on page 71.
Setting range:
–12 - +12 dB
This parameter enables determines the manner
and degree to which the volume level changes in
response to your touch on the keyboard (how hard
you play). Since the volume level of the harpsi-
chords and pipe organs do not change regardless of
how you play the keyboard, the normal setting for
these voices is 127. (See the setting range below.)
See the procedure on page 71.
In Dual mode:
Setting range:
0 (softest) - 64 (largest changes in the level) - 127 (loud-
est and fixed)
Adjusting the low-range gain
(amount of boost/cut) of the equal-
izer* [EQ LowGain]
Adjusting the high-range frequency
of the equalizer*
[EQ HighFreq. (EQ H.Freq)]
Adjusting the high-range gain
(amount of boost/cut) of the equal-
izer* [EQ HighGain]
B
D
NO
YES
A
C
Main Set?-->
EQ LowGain 0
B
D
NO
YES
A
C
Main Set?-->
EQ HighFreq. 500
B
D
NO
YES
A
C
Main Set?-->
EQ HighGain 0
Setting the touch sensitivity
[TouchSense]*
B
D
NO
YES
A
C
Main Set?-->
TouchSense 64
B
D
NO
YES
A
C
MainxLayer Set?-->
TouchSense(GrndPno1) 64
Voice for editing (Voice 1 or Voice 2)
диапазон установок:
500 Гц – 16.0 кГц
настройка высокочастотного диапазона
(величина повышаемого/понижаемого
уровня) эквалайзера [EQ HighGain]
Действия см. на стр 71.
82
CLP-295GP Owner’s Manual
Detailed Settings
Detailed settings for the voices [VOICE SETTING]
See the procedure on page 71.
Setting range:
–12 - +12 dB
See the procedure on page 71.
Setting range:
500 Hz - 16.0 kHz
See the procedure on page 71.
Setting range:
–12 - +12 dB
This parameter enables determines the manner
and degree to which the volume level changes in
response to your touch on the keyboard (how hard
you play). Since the volume level of the harpsi-
chords and pipe organs do not change regardless of
how you play the keyboard, the normal setting for
these voices is 127. (See the setting range below.)
See the procedure on page 71.
In Dual mode:
Setting range:
0 (softest) - 64 (largest changes in the level) - 127 (loud-
est and fixed)
Adjusting the low-range gain
(amount of boost/cut) of the equal-
izer* [EQ LowGain]
Adjusting the high-range frequency
of the equalizer*
[EQ HighFreq. (EQ H.Freq)]
Adjusting the high-range gain
(amount of boost/cut) of the equal-
izer* [EQ HighGain]
B
D
NO
YES
A
C
Main Set?-->
EQ LowGain 0
B
D
NO
YES
A
C
Main Set?-->
EQ HighFreq. 500
B
D
NO
YES
A
C
Main Set?-->
EQ HighGain 0
Setting the touch sensitivity
[TouchSense]*
B
D
NO
YES
A
C
Main Set?-->
TouchSense 64
B
D
NO
YES
A
C
MainxLayer Set?-->
TouchSense(GrndPno1) 64
Voice for editing (Voice 1 or Voice 2)
диапазон установок:
-12 - +12 дБ
настройка динамической
чувствительности клавиатуры
[TouchSense]
Этот параметр позволяет определять прием и
степень, при которой уровень громкости из-
меняется при нажатии на клавишу (насколько
силен ваш нажим). Поскольку уровень громкости
клавесина и органа не изменяется независимо
от нажима на клавиатуру, стандартные настройки
для этих тембров вы можете посмотреть на стр.
127. (См. диапазон установок ниже.)
Действия см. на стр 71.
82
CLP-295GP Owner’s Manual
Detailed Settings
Detailed settings for the voices [VOICE SETTING]
See the procedure on page 71.
Setting range:
–12 - +12 dB
See the procedure on page 71.
Setting range:
500 Hz - 16.0 kHz
See the procedure on page 71.
Setting range:
–12 - +12 dB
This parameter enables determines the manner
and degree to which the volume level changes in
response to your touch on the keyboard (how hard
you play). Since the volume level of the harpsi-
chords and pipe organs do not change regardless of
how you play the keyboard, the normal setting for
these voices is 127. (See the setting range below.)
See the procedure on page 71.
In Dual mode:
Setting range:
0 (softest) - 64 (largest changes in the level) - 127 (loud-
est and fixed)
Adjusting the low-range gain
(amount of boost/cut) of the equal-
izer* [EQ LowGain]
Adjusting the high-range frequency
of the equalizer*
[EQ HighFreq. (EQ H.Freq)]
Adjusting the high-range gain
(amount of boost/cut) of the equal-
izer* [EQ HighGain]
B
D
NO
YES
A
C
Main Set?-->
EQ LowGain 0
B
D
NO
YES
A
C
Main Set?-->
EQ HighFreq. 500
B
D
NO
YES
A
C
Main Set?-->
EQ HighGain 0
Setting the touch sensitivity
[TouchSense]*
B
D
NO
YES
A
C
Main Set?-->
TouchSense 64
B
D
NO
YES
A
C
MainxLayer Set?-->
TouchSense(GrndPno1) 64
Voice for editing (Voice 1 or Voice 2)
в режиме Dual
82
CLP-295GP Owner’s Manual
Detailed Settings
Detailed settings for the voices [VOICE SETTING]
See the procedure on page 71.
Setting range:
–12 - +12 dB
See the procedure on page 71.
Setting range:
500 Hz - 16.0 kHz
See the procedure on page 71.
Setting range:
–12 - +12 dB
This parameter enables determines the manner
and degree to which the volume level changes in
response to your touch on the keyboard (how hard
you play). Since the volume level of the harpsi-
chords and pipe organs do not change regardless of
how you play the keyboard, the normal setting for
these voices is 127. (See the setting range below.)
See the procedure on page 71.
In Dual mode:
Setting range:
0 (softest) - 64 (largest changes in the level) - 127 (loud-
est and fixed)
Adjusting the low-range gain
(amount of boost/cut) of the equal-
izer* [EQ LowGain]
Adjusting the high-range frequency
of the equalizer*
[EQ HighFreq. (EQ H.Freq)]
Adjusting the high-range gain
(amount of boost/cut) of the equal-
izer* [EQ HighGain]
B
D
NO
YES
A
C
Main Set?-->
EQ LowGain 0
B
D
NO
YES
A
C
Main Set?-->
EQ HighFreq. 500
B
D
NO
YES
A
C
Main Set?-->
EQ HighGain 0
Setting the touch sensitivity
[TouchSense]*
B
D
NO
YES
A
C
Main Set?-->
TouchSense 64
B
D
NO
YES
A
C
MainxLayer Set?-->
TouchSense(GrndPno1) 64
Voice for editing (Voice 1 or Voice 2)
Диапазон установок: 0 (самый мягкий уровень
звучания) – 64 (наибольшие изменения уровня) –
127 (самый высокий и зафиксированный уровень
звучания)
Подробные настройки тембров [VOICE SETTING]