Yamaha CLP-295GP - Инструкция (Страница 81)

CLP-295GP Руководство пользователя
81
настройка скорости вращения
вращающегося динамика (эффект лесли)
[RotarySpeed (Rot.Speed)]
Это меню появится на экране в том случае, если
параметр Rotary выбран для DSP Type (как опи-
сано выше).
Вы можете настроить скорость вращения для
эффекта вращающегося динамика. Действия см.
на стр 71.
CLP-295GP Owner’s Manual
81
Detailed Settings
Detailed settings for the voices [VOICE SETTING]
This will be displayed only if Rotary is selected for the
DSP Type parameter explained above.
It sets the rotation speed of the rotary speaker effect.
See the procedure on page 71.
Setting range:
Slow/Fast
This sets the depth of the DSP effect (page 80).
Some DSP Type settings do not allow you to set the
DSPDepth.
See the procedure on page 71.
Setting range:
1 (output only the original sound with almost no effect
applied) - 127 (output only the sound processed by the
effect)
See the procedure on page 71.
Setting range:
–64 - +63
See the procedure on page 71.
Setting range:
–64 - +63
Resonance can produce a distinctive “peaky” tone, making the
sound brighter and harder.
Equalizer:
An audio equalizer divides the frequency spectrum into multi-
ple regions and enables the user to adjust the relative ampli-
tude of each region.
See the procedure on page 71.
Setting range:
32 Hz - 2.0 kHz
Setting the rotation speed of the
rotary speaker*
[RotarySpeed (Rot.Speed)]
Adjusting the depth of the DSP
effect* [DSPDepth]
Adjusting the brightness of the
sound* [Brightness]
B
D
NO YES
A
C
Main Set?-->
RotarySpeed Slow
B
D
NO YES
A
C
Main Set?-->
DSPDepth 127
B
D
NO YES
A
C
Main Set?-->
Brightness 0
Adjusting the resonance effect*
[HarmonicContent (Harmonic)]
Adjusting the low-range frequency of
the equalizer*
[EQ LowFreq. (EQ L.Freq)]
B
D
NO YES
A
C
Main Set?-->
HarmonicContent 0
TIP
TERMINOLOGY
Low Gain High Gain
Low Freq. High Freq.
B
D
NO YES
A
C
Main Set?-->
EQ LowFreq. 32
диапазон установок:
Медленно/Быстро
Регулировка глубины DSP эффекта
Данное меню позволяет настроить глубину DSP
эффекта (стр.80).
Некоторые настройки DSP Type не позволяют
вам настроить глубину DSP эффекта. Действия
см. на стр 71.
CLP-295GP Owner’s Manual
81
Detailed Settings
Detailed settings for the voices [VOICE SETTING]
This will be displayed only if Rotary is selected for the
DSP Type parameter explained above.
It sets the rotation speed of the rotary speaker effect.
See the procedure on page 71.
Setting range:
Slow/Fast
This sets the depth of the DSP effect (page 80).
Some DSP Type settings do not allow you to set the
DSPDepth.
See the procedure on page 71.
Setting range:
1 (output only the original sound with almost no effect
applied) - 127 (output only the sound processed by the
effect)
See the procedure on page 71.
Setting range:
–64 - +63
See the procedure on page 71.
Setting range:
–64 - +63
Resonance can produce a distinctive “peaky” tone, making the
sound brighter and harder.
Equalizer:
An audio equalizer divides the frequency spectrum into multi-
ple regions and enables the user to adjust the relative ampli-
tude of each region.
See the procedure on page 71.
Setting range:
32 Hz - 2.0 kHz
Setting the rotation speed of the
rotary speaker*
[RotarySpeed (Rot.Speed)]
Adjusting the depth of the DSP
effect* [DSPDepth]
Adjusting the brightness of the
sound* [Brightness]
B
D
NO YES
A
C
Main Set?-->
RotarySpeed Slow
B
D
NO YES
A
C
Main Set?-->
DSPDepth 127
B
D
NO YES
A
C
Main Set?-->
Brightness 0
Adjusting the resonance effect*
[HarmonicContent (Harmonic)]
Adjusting the low-range frequency of
the equalizer*
[EQ LowFreq. (EQ L.Freq)]
B
D
NO YES
A
C
Main Set?-->
HarmonicContent 0
TIP
TERMINOLOGY
Low Gain High Gain
Low Freq. High Freq.
B
D
NO YES
A
C
Main Set?-->
EQ LowFreq. 32
диапазон установок:
1 (звуковой выход без эффектов) – 127 (звуковой
выход с применением эффекта).
настройка яркости звука [BRIGHTNESS]
Действия см. на стр 71.
CLP-295GP Owner’s Manual
81
Detailed Settings
Detailed settings for the voices [VOICE SETTING]
This will be displayed only if Rotary is selected for the
DSP Type parameter explained above.
It sets the rotation speed of the rotary speaker effect.
See the procedure on page 71.
Setting range:
Slow/Fast
This sets the depth of the DSP effect (page 80).
Some DSP Type settings do not allow you to set the
DSPDepth.
See the procedure on page 71.
Setting range:
1 (output only the original sound with almost no effect
applied) - 127 (output only the sound processed by the
effect)
See the procedure on page 71.
Setting range:
–64 - +63
See the procedure on page 71.
Setting range:
–64 - +63
Resonance can produce a distinctive “peaky” tone, making the
sound brighter and harder.
Equalizer:
An audio equalizer divides the frequency spectrum into multi-
ple regions and enables the user to adjust the relative ampli-
tude of each region.
See the procedure on page 71.
Setting range:
32 Hz - 2.0 kHz
Setting the rotation speed of the
rotary speaker*
[RotarySpeed (Rot.Speed)]
Adjusting the depth of the DSP
effect* [DSPDepth]
Adjusting the brightness of the
sound* [Brightness]
B
D
NO YES
A
C
Main Set?-->
RotarySpeed Slow
B
D
NO YES
A
C
Main Set?-->
DSPDepth 127
B
D
NO YES
A
C
Main Set?-->
Brightness 0
Adjusting the resonance effect*
[HarmonicContent (Harmonic)]
Adjusting the low-range frequency of
the equalizer*
[EQ LowFreq. (EQ L.Freq)]
B
D
NO YES
A
C
Main Set?-->
HarmonicContent 0
TIP
TERMINOLOGY
Low Gain High Gain
Low Freq. High Freq.
B
D
NO YES
A
C
Main Set?-->
EQ LowFreq. 32
диапазон установок:
-64 - +63
настройка эффекта резонанса
[HarmonicContent (Harmonic)]
Действия см. на стр 71.
CLP-295GP Owner’s Manual
81
Detailed Settings
Detailed settings for the voices [VOICE SETTING]
This will be displayed only if Rotary is selected for the
DSP Type parameter explained above.
It sets the rotation speed of the rotary speaker effect.
See the procedure on page 71.
Setting range:
Slow/Fast
This sets the depth of the DSP effect (page 80).
Some DSP Type settings do not allow you to set the
DSPDepth.
See the procedure on page 71.
Setting range:
1 (output only the original sound with almost no effect
applied) - 127 (output only the sound processed by the
effect)
See the procedure on page 71.
Setting range:
–64 - +63
See the procedure on page 71.
Setting range:
–64 - +63
Resonance can produce a distinctive “peaky” tone, making the
sound brighter and harder.
Equalizer:
An audio equalizer divides the frequency spectrum into multi-
ple regions and enables the user to adjust the relative ampli-
tude of each region.
See the procedure on page 71.
Setting range:
32 Hz - 2.0 kHz
Setting the rotation speed of the
rotary speaker*
[RotarySpeed (Rot.Speed)]
Adjusting the depth of the DSP
effect* [DSPDepth]
Adjusting the brightness of the
sound* [Brightness]
B
D
NO YES
A
C
Main Set?-->
RotarySpeed Slow
B
D
NO YES
A
C
Main Set?-->
DSPDepth 127
B
D
NO YES
A
C
Main Set?-->
Brightness 0
Adjusting the resonance effect*
[HarmonicContent (Harmonic)]
Adjusting the low-range frequency of
the equalizer*
[EQ LowFreq. (EQ L.Freq)]
B
D
NO YES
A
C
Main Set?-->
HarmonicContent 0
TIP
TERMINOLOGY
Low Gain High Gain
Low Freq. High Freq.
B
D
NO YES
A
C
Main Set?-->
EQ LowFreq. 32
диапазон установок:
-64 - +63
ПрИмечаНИе:
Резонанс может придавать “острую” тональность,
делая звук ярче и жестче.
настройка низкочастотного дипазона
эквалайзера [EQ LowFreq. (EQ L.Freq)]
ТермИНОлОгИя:
Эквалайзер. Аудио эквалайзер разделяет частоту на
части и позволяет пользователю настраивать амплиту-
ду каждой из этих частей.
CLP-295GP Owner’s Manual
81
Detailed Settings
Detailed settings for the voices [VOICE SETTING]
This will be displayed only if Rotary is selected for the
DSP Type parameter explained above.
It sets the rotation speed of the rotary speaker effect.
See the procedure on page 71.
Setting range:
Slow/Fast
This sets the depth of the DSP effect (page 80).
Some DSP Type settings do not allow you to set the
DSPDepth.
See the procedure on page 71.
Setting range:
1 (output only the original sound with almost no effect
applied) - 127 (output only the sound processed by the
effect)
See the procedure on page 71.
Setting range:
–64 - +63
See the procedure on page 71.
Setting range:
–64 - +63
Resonance can produce a distinctive “peaky” tone, making the
sound brighter and harder.
Equalizer:
An audio equalizer divides the frequency spectrum into multi-
ple regions and enables the user to adjust the relative ampli-
tude of each region.
See the procedure on page 71.
Setting range:
32 Hz - 2.0 kHz
Setting the rotation speed of the
rotary speaker*
[RotarySpeed (Rot.Speed)]
Adjusting the depth of the DSP
effect* [DSPDepth]
Adjusting the brightness of the
sound* [Brightness]
B
D
NO YES
A
C
Main Set?-->
RotarySpeed Slow
B
D
NO YES
A
C
Main Set?-->
DSPDepth 127
B
D
NO YES
A
C
Main Set?-->
Brightness 0
Adjusting the resonance effect*
[HarmonicContent (Harmonic)]
Adjusting the low-range frequency of
the equalizer*
[EQ LowFreq. (EQ L.Freq)]
B
D
NO YES
A
C
Main Set?-->
HarmonicContent 0
TIP
TERMINOLOGY
Low Gain High Gain
Low Freq. High Freq.
B
D
NO YES
A
C
Main Set?-->
EQ LowFreq. 32
низкий
диапазон
высокий
диапазон
низкая
частота
высокая
частота
Действия см. на стр 71.
CLP-295GP Owner’s Manual
81
Detailed Settings
Detailed settings for the voices [VOICE SETTING]
This will be displayed only if Rotary is selected for the
DSP Type parameter explained above.
It sets the rotation speed of the rotary speaker effect.
See the procedure on page 71.
Setting range:
Slow/Fast
This sets the depth of the DSP effect (page 80).
Some DSP Type settings do not allow you to set the
DSPDepth.
See the procedure on page 71.
Setting range:
1 (output only the original sound with almost no effect
applied) - 127 (output only the sound processed by the
effect)
See the procedure on page 71.
Setting range:
–64 - +63
See the procedure on page 71.
Setting range:
–64 - +63
Resonance can produce a distinctive “peaky” tone, making the
sound brighter and harder.
Equalizer:
An audio equalizer divides the frequency spectrum into multi-
ple regions and enables the user to adjust the relative ampli-
tude of each region.
See the procedure on page 71.
Setting range:
32 Hz - 2.0 kHz
Setting the rotation speed of the
rotary speaker*
[RotarySpeed (Rot.Speed)]
Adjusting the depth of the DSP
effect* [DSPDepth]
Adjusting the brightness of the
sound* [Brightness]
B
D
NO YES
A
C
Main Set?-->
RotarySpeed Slow
B
D
NO YES
A
C
Main Set?-->
DSPDepth 127
B
D
NO YES
A
C
Main Set?-->
Brightness 0
Adjusting the resonance effect*
[HarmonicContent (Harmonic)]
Adjusting the low-range frequency of
the equalizer*
[EQ LowFreq. (EQ L.Freq)]
B
D
NO YES
A
C
Main Set?-->
HarmonicContent 0
TIP
TERMINOLOGY
Low Gain High Gain
Low Freq. High Freq.
B
D
NO YES
A
C
Main Set?-->
EQ LowFreq. 32
диапазон установок:
32 гц – 2.0 кгц
Подробные настройки тембров [VOICE SETTING]