Remote control, Ipod – Инструкция по эксплуатации Yamaha RX-V2065

Страница 72

Advertising
background image

70

En

Troubleshooting

Note

• In case of a transmission error without a status message appearing on the front panel display and GUI screen, check the connection of your iPod

(page 18).

Remote control

Problem

Cause

Remedy

See

page

The remote control

does not work or

function properly.

Wrong distance or angle.

The remote control will function within a maximum

range of 6 m (20 ft) and no more than 30 degrees

offaxis from the front panel.

6

Direct sunlight or lighting (from an

inverter type of fluorescent lamp, strobe

light, etc.) is striking the remote control

sensor of this unit.

Adjust the lighting angle or reposition this unit.

The batteries are weak.

Replace all batteries.

6, 8

The remote control ID of the remote

control and this unit do not match.

Match the remote control ID of this unit and the

remote control.

64

The remote control code is not correctly

set.

Set the remote control code correctly using “List of

remote control codes” at the end of this manual.

61

Try setting another code of the same manufacturer

using “List of remote control codes” at the end of this

manual.

61

If this unit does not work when you press jCursor,

do the following.

When the key does not work during DVD disc menu

operation: press the dInput selection keys on

the remote control again.

When the key does not work during Option menu or

Setup menu operation: press the key applicable for

the current menu operation again.

Even if the remote control code is

correctly set, there are some models that

do not respond to the remote control.

The remote control

does not learn new

functions.

The batteries of remote control of this unit

(or the external component) are weak.

Replace the batteries

6

The distance between the two remote

controls is too long or too short.

Place the remote controls at a proper distance.

62

The signal coding or modulation of the

other remote control is not compatible

with this remote control.

Learning is not possible.

Memory capacity is full.

Delete unnecessary functions to free some memory

space for the new functions.

62

iPod™

Status message

Cause

Remedy

See

page

Loading...

This unit is in the middle of recognizing

the connection with your iPod.

This unit is in the middle of acquiring

song lists from your iPod.

Advertising