Yamaha RX-V765 - Инструкция (Страница 52)

50
En
Changing various settings of this unit (SETUP menu)
■ 2 Lipsync
Adjusts delay between video output and audio output.
HDMI Auto
Automatically adjusts output timing of audio and video
signals when a monitor that supports an automatic lip-
sync function is connected to this unit.
Auto Delay
Fine adjusts the correction time when “HDMI Auto” is set
to “On.” The actual correction time is displayed under in
“Auto Delay” field and an offset time set by the user in
“offset” field.
Manual Delay
Manually fine adjusts the correction time. Select this when
the connected monitor does not support the automatic lip-
sync function or you set “HDMI Auto” to “Off.”
You can set various items for HDMI and display.
y
• The default settings are marked with “*.”
You can set items for HDMI.
■ Control
Selects on or off of HDMI control functions when a
component that supports the HDMI control functions is
connected with this unit.
When this is set to “On,” signals input from the HDMI 1-4
jacks are output to a monitor component even when this
unit is on standby.
■ Standby Through
Selects on or off of output of HDMI signals input from the
HDMI 1-4 jacks to the HDMI OUT jack when this unit is
on standby. When this parameter is set to “On” signals
input from the HDMI 1-4 jacks can be output to a monitor
component.
This item is not displayed when “Control” is set to “On.”
y
• To enables pass-through output, any one of the input sources connected
to the HDMI 1-4 jacks must be selected before switching to standby.
• During pass-through output, the HDMI THROUGH indicator on the
front panel display lights up. While the indicator lights up, it consumes 1
to 3W of power depending on a condition of an HDMI signal passing
through this unit.
■ Audio Output
Selects this unit or a component connected to this unit via
the HDMI OUT jack of this unit for reproducing sound
signals input from the HDMI 1-4 jacks.
This item is not displayed when “Control” is set to “On.”
Note
• When “TV” or “Amp+TV” is selected, signal formats of audio and video
signals output from this unit to the monitor vary depending on
specifications of the monitor.
■ Resolution
Upscales the resolution of HDMI output that is converted
from analog video input signals and output from the
HDMI OUT jack.
Notes
• Resolution of the HDMI output converted from 720p or 1080i video
signals cannot be upscaled.
• When a video monitor is connected to this unit via the HDMI jack, this
unit automatically detects a resolution that the monitor supports. An
asterisk (*) appears on the left of the detected resolution.
• If this unit cannot detect the resolution that the monitor supports, set
“MON.CHK” in the ADVANCED SETUP menu to “SKIP”
(see page 58) and try it again.
Choices: Off*/On
Off Select this when the connected monitor does
not support the automatic lip-sync function or
that function is not to be used. Set the
correction time in “Manual Delay.”
On Select this when the connected monitor
supports the automatic lip-sync function. Fine
adjust the correction time in “Auto Delay.”
Adjustable range: 0* to 240ms (1 ms steps)
Adjustable range: 0* to 240ms (1 ms steps)
Function Setup
1 HDMI
Choices: On/Off*
On Enables the HDMI control function.
Off Disables the HDMI control function.
Choices: On/Off*
On Outputs the HDMI signals to the HDMI OUT
jack.
Off Does not output the HDMI signals to the
HDMI OUT jack.
Choices: Amp*/TV/Amp+TV
Amp Outputs HDMI sound signals form the
speakers connected to this unit.
TV Outputs HDMI sound signals from the
speakers of a TV connected to this unit.
Sound output from the speakers connected to
this unit is muted.
Amp+TV Outputs HDMI sound signals from the
speakers connected to this unit and the
speakers of a TV connected to this unit.
Choices: Through*/576p/720p/1080i/1080p