ZELMER 476 - Инструкция (Страница 87)

You mustn't push the products with your fingers or other objects.
In case of the necessity (In case of excessive accumulation of the pulp on the filter,
which causes juice extractor vibrations) you can use TURBO button (b). The
engine operates in such case on maximal rotation for approximately 2 seconds.
After this time, the TURBO function switches off automatically, and the engine
returns to previous rotation.
ATTENTION! Repeated usage of TURBO function can take place after min. 10
seconds.
When centrifuging juice of small fruits, use the bowl for small fruits (7), put it on the
chute
Pour the extracted juice into glasses or cups prepared in advance
The juice collector (9) is equipped with foam separator (10), which task is to stop the
thicker particles of juice and foam.
We recommend natural version of juice, less clear. In order to obtain such
a juice it is necessary to remove the foam separator.
.
.
After operation (juice centrifuging)
Switch the juice extractor off, turning the switch (a) to position
Unplug the appliance
After the motor stops start to disassemble the juice extractor in order to wash the
parts (see Preparing for operation”)
Remove the accumulated pulp from the pulp collector „0”.
.
„ .
.
Prevent the excess of the pulp collector. The excessive pulp can pour out while
leaning the collector during removing.
Juice extractor maintenance rules
Clean carefully after each usage, to prevent drying of juice and fruit remains
Remove the dirt from the corners with a bottle brush or tooth brush
Clean the motor with damped cloth sprinkled with washing up liquid. Then dry it .
.
.
The exception is a filter (4). It should be washed with hard brush
(13) only, which is included to this juice extractor equipment. Do
not use any metal brushes to clean the filter
!
The following elements of the equipment: juice bowl, insert, and lid, bowl for small
fruits, pusher and the juice collector including foam separator should be washed in
hot water with wash-up liquid.
You can clean them in dishwashers in maximum temperature 60ºC.
When water or juice getting into the motor, stop operation immediately and bring the
appliance to service for inspection.
87