ZELMER 476 - Инструкция (Страница 85)

85
1
a
b
c
d
e
2
f
3
g
4
5
6
7
8
12
13
1
2
9
10
11
1. Juice extractor motor
a) I-0-II
b) TURBO
c)
d)
e) switch
button
skimmer
vacuum cup
supply cord
2. Bowl
f) juice spout
3.
g) Bowl insert
fin
4.
5.
6.
7.
8.
9. Filter
Lid
Locking bar
Bowl for small fruits
Pusher
Juice collector
10.
11.
12.
13. Foam separator
Lid of collector
Pulp collector
Brush
Part names
Disassemble the juice extractor before first usage and
clean the parts in contact with processed product
.
Preparations for operation (disassembling,
assembling)
Place the juice extractor near the socket on the firm,
clean and dry surface
Pull down the locking bar (6) so that the tracks moved out
of grooves of the lid (5) from position 1 to position 2
Take the pusher (8) out and remove the bowl (7) and lid
(5). Then remove the bowl (2) including the insert (3) and
filter (4)
Finally, disassemble the insert (3) from the bowl (2
.
.
.
).
Wash the disassembled parts (apart from the motor)
carefully in hot water and wash-up liquid. You can clean
them in dishwasher in max temp. 60ºC. After drying
carefully start assembling the clean parts.
Align the bowl (2) to the motor (1), so that the
juice spout (f) was placed exactly in the casing
(1) groove and 4 buckles from the upper part of
the motor (1) were placed inside the 4 grooves
in the bottom of the bowl (2)
.