Yamaha 02r96v2 - Инструкция (Страница 276)

276
02R96 Версия 2 — Руководство Пользователя
REV TIME 0.3–99.0 s Reverb time
REV TYPE Hall, Room, Stage, Plate Reverb type
INI. DLY 0.0–100.0 ms Initial delay before reverb begins
HI. RATIO 0.1–1.0 High-frequency reverb time ratio
LO. RATIO 0.1–2.4 Low-frequency reverb time ratio
DIFF. 0–10 Reverb diffusion (left–right reverb spread)
DENSITY 0–100% Reverb density
E/R BAL. 0–100%
Balance of early reflections and reverb
(0% = all reverb, 100% = all early reflections)
HPF THRU, 21.2 Hz–8.00 kHz High-pass filter cutoff frequency
LPF 50.0 Hz–16.0 kHz, THRU Low-pass filter cutoff frequency
REV TIME 0.3–99.0 s Reverb time
REV TYPE Hall, Room, Stage, Plate Reverb type
HI. RATIO 0.1–1.0 High-frequency reverb time ratio
DIFF. 0–10 Reverb diffusion (left–right reverb spread)
DENSITY 0–100% Reverb density
HPF THRU, 21.2 Hz–8.00 kHz High-pass filter cutoff frequency
LPF 50.0 Hz–16.0 kHz, THRU Low-pass filter cutoff frequency
DIV. 0–100%
Divergence determines how the front center signal is fed to the
Left, Right, and Center channels. When set to 0%, it’s fed only to
the Left and Right channels (i.e., Phantom Center). When set to
50%, it’s fed equally to the Left, Right, and Center channels. When
set to 100%, it’s fed to only the Center channel (i.e., Real Center).
ROOMSIZE 0.1–20.0 Size of simulated room’s reverb
POS L/R L63–R63 Left/right listening position
POS F/R F63–R63 Front/rear listening position
POS CTRL OFF, NORMAL, INVERT 1
ER L/R L63–R63 Left/right early reflections position
ER F/R F63–R63 Front/rear early reflections position
ER LVL 0–100% Early reflections level
ER CTRL OFF, NORMAL, INVERT 1
REV L/R L63–R63 Left/right reverb position
REV F/R F63–R63 Front/rear reverb position
REV LVL 0–100% Reverb level
REV CTRL OFF, NORMAL, INVERT 1
POS RAD. 0–63 Radius of the panning track at the listening position
ER RAD. 0–63 Radius of the panning track for early reflections
REV RAD. 0–63 Radius of the panning track for reverb
Приложение А: Перечень параметров
Стереофоническая реверберация (ST REVERB)
Два входа, два выхода стереофонического ревербератора.
Объемная реверберация (REVERB 5.1)
Один вход, шесть выходов объемной реверберации 5.1 с объемным панорамированием.
1. При установке варианта NORMAL положение можно регулировать при помощи джойстика при свечении SELECTED CANNEL PAN /
SURROUND [EFFECT]. При выборе варианта INVERT джойстик действует в обратном направлении. При выборе варианта OFFуправле-
ние джойстиком блокируется. Кнопка CTRL на странице Eff ect Edit действует аналогично кнопке [EFFECT].
Параметр Диапазон значений Описание
Параметр Диапазон значений Описание