ZELMER 486 - Инструкция (Страница 73)

75
Dear Clients!
Please read these instructions carefully. We would like to
draw your special attention to Safety Operation Instructions.
Keep this user’s manual for further reference.
Appliance characteristic
Juice extractor type 486 is an electrical appliance for fast
fruit and vegetable juice centrifuging including automatic
pulp separation.
The raw material is pulped and then the juice is centrifuged
from the pulp. The usage advantages are increased due to
the easy and simple operation. Electronic speed stabilizer
provides constant rotation speed independent on loading,
which allows juice even consistency obtaining. The juice
extractor is equipped with 2 centrifuging speeds (for soft and
hard fruit), which have been selected to obtain the optimal
quality parameters for squeezed juice. Keeping the maximal
content of vitamins, pectin, enzymes and minerals causes
the lower juice clarity. This is an intended effect, as the juice
extractor Manufacturer decided, that keeping the highest
nutrient, pro-health and dietetic values of a juice is more
important than its clarity. The juice extractor is equipped
with special safety system preventing starting it in case
of incomplete appliance assembling. The juice extractor
is additionally equipped with filter self-cleaning function.
After pressing TURBO button the engine operates 1,5÷2
seconds with high rotation. High rotation helps to clean the
filter in case the vibration occurring due to excessive pulp
accumulation. TURBO function can be used in 10 seconds
intervals only. The juice extractor can operate 15 minutes
without any break. The quantity of juice obtained from i.e.
1kg of a raw material, depends on its freshness, as well as
on filter cleanness and pulping blade condition.
The parts in contact with processed raw materials are made
of materials permitted for contact with food.
Safety operation instructions
Do not disconnect the plug from the socket pulling the
●
cord.
The juice extractor must be plugged to alternating current
●
230 V grounded receptacle.
Do not start up the appliance when the supplying cord is
●
damaged or the casing is visibly damaged.
If the non-detachable part of the cord is damaged,
it should be replaced by the producer or at a proper
service point or by a qualified person in order to avoid
any hazards.
The appliance can be refurbished by trained staff only.
Improper refurbishment can cause the serious hazard to
the user. In case of any defects occurrence, contact the
qualified service agent immediately.
The appliance is intended for domestic use.
●
In case it is
used for food business purposes, the warranty conditions
shall change.
Do not use the juice extractor when the filter is
●
damaged.
EN
Before you start the juice extractor up, check the lid if it is
●
locked well with the locking bar.
Do not unfasten the locking bar during juice extractor
●
operation and the filter wiring, as in such case the safety
system will switch the appliance off.
Turn off the device and unplug it from an outlet before
●
replacing the equipment or approaching moving parts
during use.
Unplug always before cleaning, assembling or
●
disassembling.
To push the product use the pusher only.
●
Do not overload the appliance with excessive amount of
●
product or to strong pushing (with pusher).
Switch the juice extractor off immediately, when you
●
notice strong vibrations or rotation decrease. Clean the
filter and its casing.
Stop the operation and unplug the appliance when the
●
product is blocked in chute or pulping blade. Unblock it.
Be especially careful with the juice extractor operation in
●
the presence of children.
Stop the operation immediately and unplug the appliance
●
when any liquid gets into the motor. Bring the juice
extractor to the service for inspection.
Do not expose the juice extractor to temperatures over
●
60°C.
Do not leave the appliance plugged unattended.
●
Do not place the juice extractor on the wet surface.
●
Unplug after operation.
●
Do not immerse the motor in water neither clean it under
●
running water.
Do not clean the casing with aggressive detergents,
●
such as emulsion, milk, paste, etc. They can remove the
graphic symbols such as: scales, labels, caution signs,
etc.
Clean the metal parts, especially the filter including the
●
sharp pulping blade with soft brush.
Do not use the juice extractor without the pulp collector.
●
To make the maintenance easier, you can put the plastic
●
bag into the pulp collector, which you can remove to the
rubbish bin after operation.
This appliance is not intended for use by persons
●
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure that they do not
●
play with the appliance.
Do not overload the appliance with extensive amount
of product or do not push it to strong (with a pusher),
because a sudden increase of juice amount in the bowl
spout can cause the juice overflow out of the lid or into
pulp collector.