Yamaha CP300 - Инструкция (Страница 87)

Руководство пользователя CP300 
ПРИМЕЧАНИЕ
данные песни содержат 16 каналов. каж-
дая инструментальная партия назначает-
ся отдельному каналу, поэтому для этого
инструмента слова «канал� и «звуковая
дорожка� имеют одинаковое значение.
ПРИМЕЧАНИЕ
каналы, не содержащие данных, не отоб-
ражаются. Однако для некоторых песен
могут отображаться все каналы (в том
числе и не содержащие данных).
ПРИМЕЧАНИЕ
когда вы удаляете данные со всех
каналов с помощью параметра «All�, All�, �,
вы можете перезаписать песню. В этом
случае сохраняется пустой файл песни,
не имеющий канала.
��om/�o �epe�t
Позволяет выделить секцию в рамках песни и неод-
нократно проигрывать её. секция может быть выде-
лена свободно (в тактах/битах), а воспроизведение
повторяется, когда достигается точка, находящаяся
перед битом в конечной точке.
если вы начали проигрывать песню, выбрав пара-
метр “�epeat �n”, начинается вступительный отсчёт,
за которым идёт воспроизведение выбранной части,
продолжающееся до нажатия на кнопку [S��P]. если
вы выбираете параметр “�epeat ���,”, воспроизведе-
ние будет в обычном режиме.
Settings for Song Recording and Playback—Song Settings
CP300 Owner’s Manual
87
Ref
erence
n Channels that do not contain any data are not displayed.
However, for some Songs, all channels (including the
channels that contain no data) may be displayed.
n When you clear all channels using the “ALL” parameter,
you can overwrite the Song. In this case, an empty Song
file having no channel data is saved.
This allows you to specify a section within a Song and play
it back repeatedly. The section can be specified freely (in
measures/beats), and playback repeats after it reaches the
point just prior to the beat specified as the end point.
If you start playing back a Song with “Repeat On” selected,
a lead-in count starts, followed by the repeated playback of
the specified part until you press the [STOP] button. If you
select “Repeat Off,” normal playback starts.
Settings: RepeatOn, RepeatOff
Default setting: RepeatOff
If you select “Repeat On,” use the C [–][+] and D [–][+] buttons
to specify the range to be repeated during Song playback.
n When you select another Song, the specified range is
automatically cancelled and the Repeat function is turned
off.
This allows you to repeatedly play back all Songs or a single
Song selected from storage memory.
When you start playback, the CP300 plays the Song you
selected from the front panel, then starts repeat playback of
the specified Songs until you press the [STOP] button.
Press the [STOP] button to return to the top of the Song.
Settings:
Default setting: PresetSongs
This allows you to set the time signature of the click.
Specify the numerator of the time signature by using the
C [–][+] buttons and specify the denominator by using the
D [–][+] buttons. For example, to specify 3/4 time, use the
C [–][+] buttons to select “3” and the D [–][+] buttons to
select “4.”
Setting range for the numerator: 1 – 16
Setting options for the denominator: 2, 4, 8
Default setting: 4/4
This allows you to set volume of the click sound.
Setting range: 0 – 127
Default setting: 100
This allows you to select whether the click sound has a bell
accent, or plays only a click sound.
Setting range:
Default setting: BellOff
From/To Repeat
Song Repeat
PresetSongs All Preset Songs
All All Memory Songs and Preset Songs
OneSong One Song selected from the front panel
MemorySongs All recorded Songs
FromToRepeat RepeatOff
From 001:001 To 002:001
NO YES
A B
D C
SongRepeat Off
PresetSongs
NO YES
A B
D C
Time Signature
Click Volume
Click Type
BellOff Click (standard click sound)
BellOn Click and bell
TimeSignature
4/ 4
NO YES
A B
D C
ClickVolume
100
NO YES
A B
D C
ClickType
BellOff
NO YES
A B
D C
Настройки: RepeatOn, RepeatOff
Настройка по умолчанию: RepeatOff
Если вы выбираете RepeatOn, то с помощью кнопок
C [–][+] и D [–][+] определите диапазон, который бу-
дет повторяться во время воспроизведения песни.
ПРИМЕЧАНИЕ
когда вы выбираете другую песню,
выбранный диапазон автоматически от-
меняется, и функция �epeat отключается. �epeat отключается. отключается.
Song �epe�t
Позволяет неоднократно проигрывать все песни или
одну из песен из хранилища памяти.
когда вы начинаете воспроизводить песню, инстру-
мент проигрывает песню, выбранную с помощью
кнопок на передней панели, затем повторяет воспро-
изведение определённой песни до тех пор, пока вы
не нажмёте кнопку [S��P]. нажмите кнопку [S��P],
чтобы вернуться в начало песни .
Settings for Song Recording and Playback—Song Settings
CP300 Owner’s Manual
87
Ref
erence
n Channels that do not contain any data are not displayed.
However, for some Songs, all channels (including the
channels that contain no data) may be displayed.
n When you clear all channels using the “ALL” parameter,
you can overwrite the Song. In this case, an empty Song
file having no channel data is saved.
This allows you to specify a section within a Song and play
it back repeatedly. The section can be specified freely (in
measures/beats), and playback repeats after it reaches the
point just prior to the beat specified as the end point.
If you start playing back a Song with “Repeat On” selected,
a lead-in count starts, followed by the repeated playback of
the specified part until you press the [STOP] button. If you
select “Repeat Off,” normal playback starts.
Settings: RepeatOn, RepeatOff
Default setting: RepeatOff
If you select “Repeat On,” use the C [–][+] and D [–][+] buttons
to specify the range to be repeated during Song playback.
n When you select another Song, the specified range is
automatically cancelled and the Repeat function is turned
off.
This allows you to repeatedly play back all Songs or a single
Song selected from storage memory.
When you start playback, the CP300 plays the Song you
selected from the front panel, then starts repeat playback of
the specified Songs until you press the [STOP] button.
Press the [STOP] button to return to the top of the Song.
Settings:
Default setting: PresetSongs
This allows you to set the time signature of the click.
Specify the numerator of the time signature by using the
C [–][+] buttons and specify the denominator by using the
D [–][+] buttons. For example, to specify 3/4 time, use the
C [–][+] buttons to select “3” and the D [–][+] buttons to
select “4.”
Setting range for the numerator: 1 – 16
Setting options for the denominator: 2, 4, 8
Default setting: 4/4
This allows you to set volume of the click sound.
Setting range: 0 – 127
Default setting: 100
This allows you to select whether the click sound has a bell
accent, or plays only a click sound.
Setting range:
Default setting: BellOff
From/To Repeat
Song Repeat
PresetSongs All Preset Songs
All All Memory Songs and Preset Songs
OneSong One Song selected from the front panel
MemorySongs All recorded Songs
FromToRepeat RepeatOff
From 001:001 To 002:001
NO YES
A B
D C
SongRepeat Off
PresetSongs
NO YES
A B
D C
Time Signature
Click Volume
Click Type
BellOff Click (standard click sound)
BellOn Click and bell
TimeSignature
4/ 4
NO YES
A B
D C
ClickVolume
100
NO YES
A B
D C
ClickType
BellOff
NO YES
A B
D C
Настройки:
PresetSongs все предустановленные песни
All все предустановленные и записан-
ные песни
OneSong одна песня, выбранная с помощью
кнопок на передней панели
MemorySongs все записанные песни
Настройка по умолчанию: PresetSongs
�ime Sign�tu�e
Позволяет установить тактовый размер метронома.
Определите числитель тактового размера с помощью
кнопок � [–][+] и знаменатель с помощью кнопок D
[–][+]. например, чтобы установить такт ѕ, с помо-
щью кнопок � [–][+] выберите �, а D [–][+] - 4.
Settings for Song Recording and Playback—Song Settings
CP300 Owner’s Manual
87
Ref
erence
n Channels that do not contain any data are not displayed.
However, for some Songs, all channels (including the
channels that contain no data) may be displayed.
n When you clear all channels using the “ALL” parameter,
you can overwrite the Song. In this case, an empty Song
file having no channel data is saved.
This allows you to specify a section within a Song and play
it back repeatedly. The section can be specified freely (in
measures/beats), and playback repeats after it reaches the
point just prior to the beat specified as the end point.
If you start playing back a Song with “Repeat On” selected,
a lead-in count starts, followed by the repeated playback of
the specified part until you press the [STOP] button. If you
select “Repeat Off,” normal playback starts.
Settings: RepeatOn, RepeatOff
Default setting: RepeatOff
If you select “Repeat On,” use the C [–][+] and D [–][+] buttons
to specify the range to be repeated during Song playback.
n When you select another Song, the specified range is
automatically cancelled and the Repeat function is turned
off.
This allows you to repeatedly play back all Songs or a single
Song selected from storage memory.
When you start playback, the CP300 plays the Song you
selected from the front panel, then starts repeat playback of
the specified Songs until you press the [STOP] button.
Press the [STOP] button to return to the top of the Song.
Settings:
Default setting: PresetSongs
This allows you to set the time signature of the click.
Specify the numerator of the time signature by using the
C [–][+] buttons and specify the denominator by using the
D [–][+] buttons. For example, to specify 3/4 time, use the
C [–][+] buttons to select “3” and the D [–][+] buttons to
select “4.”
Setting range for the numerator: 1 – 16
Setting options for the denominator: 2, 4, 8
Default setting: 4/4
This allows you to set volume of the click sound.
Setting range: 0 – 127
Default setting: 100
This allows you to select whether the click sound has a bell
accent, or plays only a click sound.
Setting range:
Default setting: BellOff
From/To Repeat
Song Repeat
PresetSongs All Preset Songs
All All Memory Songs and Preset Songs
OneSong One Song selected from the front panel
MemorySongs All recorded Songs
FromToRepeat RepeatOff
From 001:001 To 002:001
NO YES
A B
D C
SongRepeat Off
PresetSongs
NO YES
A B
D C
Time Signature
Click Volume
Click Type
BellOff Click (standard click sound)
BellOn Click and bell
TimeSignature
4/ 4
NO YES
A B
D C
ClickVolume
100
NO YES
A B
D C
ClickType
BellOff
NO YES
A B
D C
диапазон настроек для числителя: 1 – 16
диапазон настроек для знаменателя: 2, 4, 8
Настройка по умолчанию: 4/4
Click Volume
Позволяет установить громкость метронома
Settings for Song Recording and Playback—Song Settings
CP300 Owner’s Manual
87
Ref
erence
n Channels that do not contain any data are not displayed.
However, for some Songs, all channels (including the
channels that contain no data) may be displayed.
n When you clear all channels using the “ALL” parameter,
you can overwrite the Song. In this case, an empty Song
file having no channel data is saved.
This allows you to specify a section within a Song and play
it back repeatedly. The section can be specified freely (in
measures/beats), and playback repeats after it reaches the
point just prior to the beat specified as the end point.
If you start playing back a Song with “Repeat On” selected,
a lead-in count starts, followed by the repeated playback of
the specified part until you press the [STOP] button. If you
select “Repeat Off,” normal playback starts.
Settings: RepeatOn, RepeatOff
Default setting: RepeatOff
If you select “Repeat On,” use the C [–][+] and D [–][+] buttons
to specify the range to be repeated during Song playback.
n When you select another Song, the specified range is
automatically cancelled and the Repeat function is turned
off.
This allows you to repeatedly play back all Songs or a single
Song selected from storage memory.
When you start playback, the CP300 plays the Song you
selected from the front panel, then starts repeat playback of
the specified Songs until you press the [STOP] button.
Press the [STOP] button to return to the top of the Song.
Settings:
Default setting: PresetSongs
This allows you to set the time signature of the click.
Specify the numerator of the time signature by using the
C [–][+] buttons and specify the denominator by using the
D [–][+] buttons. For example, to specify 3/4 time, use the
C [–][+] buttons to select “3” and the D [–][+] buttons to
select “4.”
Setting range for the numerator: 1 – 16
Setting options for the denominator: 2, 4, 8
Default setting: 4/4
This allows you to set volume of the click sound.
Setting range: 0 – 127
Default setting: 100
This allows you to select whether the click sound has a bell
accent, or plays only a click sound.
Setting range:
Default setting: BellOff
From/To Repeat
Song Repeat
PresetSongs All Preset Songs
All All Memory Songs and Preset Songs
OneSong One Song selected from the front panel
MemorySongs All recorded Songs
FromToRepeat RepeatOff
From 001:001 To 002:001
NO YES
A B
D C
SongRepeat Off
PresetSongs
NO YES
A B
D C
Time Signature
Click Volume
Click Type
BellOff Click (standard click sound)
BellOn Click and bell
TimeSignature
4/ 4
NO YES
A B
D C
ClickVolume
100
NO YES
A B
D C
ClickType
BellOff
NO YES
A B
D C
диапазон настроек: 0 – 127
Настройка по умолчанию: 100
Click ���pe
Позволяет установить, будет ли у метронома отзвук
колокола, или стандартный звук.
Settings for Song Recording and Playback—Song Settings
CP300 Owner’s Manual 87
Ref
erence
n Channels that do not contain any data are not displayed.
However, for some Songs, all channels (including the
channels that contain no data) may be displayed.
n When you clear all channels using the “ALL” parameter,
you can overwrite the Song. In this case, an empty Song
file having no channel data is saved.
This allows you to specify a section within a Song and play
it back repeatedly. The section can be specified freely (in
measures/beats), and playback repeats after it reaches the
point just prior to the beat specified as the end point.
If you start playing back a Song with “Repeat On” selected,
a lead-in count starts, followed by the repeated playback of
the specified part until you press the [STOP] button. If you
select “Repeat Off,” normal playback starts.
Settings: RepeatOn, RepeatOff
Default setting: RepeatOff
If you select “Repeat On,” use the C [–][+] and D [–][+] buttons
to specify the range to be repeated during Song playback.
n When you select another Song, the specified range is
automatically cancelled and the Repeat function is turned
off.
This allows you to repeatedly play back all Songs or a single
Song selected from storage memory.
When you start playback, the CP300 plays the Song you
selected from the front panel, then starts repeat playback of
the specified Songs until you press the [STOP] button.
Press the [STOP] button to return to the top of the Song.
Settings:
Default setting: PresetSongs
This allows you to set the time signature of the click.
Specify the numerator of the time signature by using the
C [–][+] buttons and specify the denominator by using the
D [–][+] buttons. For example, to specify 3/4 time, use the
C [–][+] buttons to select “3” and the D [–][+] buttons to
select “4.”
Setting range for the numerator: 1 – 16
Setting options for the denominator: 2, 4, 8
Default setting: 4/4
This allows you to set volume of the click sound.
Setting range: 0 – 127
Default setting: 100
This allows you to select whether the click sound has a bell
accent, or plays only a click sound.
Setting range:
Default setting: BellOff
From/To Repeat
Song Repeat
PresetSongs All Preset Songs
All All Memory Songs and Preset Songs
OneSong One Song selected from the front panel
MemorySongs All recorded Songs
FromToRepeat RepeatOff
From 001:001 To 002:001
NO YES
A B
D C
SongRepeat Off
PresetSongs
NO YES
A B
D C
Time Signature
Click Volume
Click Type
BellOff Click (standard click sound)
BellOn Click and bell
TimeSignature
4/ 4
NO YES
A B
D C
ClickVolume
100
NO YES
A B
D C
ClickType
BellOff
NO YES
A B
D C
диапазон настроек:
BellOff щелчки (стандартный звук метронома).
BellOn щелчки и звук колокола
Установка по умолчанию: BellOff
Настройки для записи и воспроизведения песни – настройки песни (Song Settings)