Yamaha CP300 - Инструкция (Страница 56)

 Руководство пользователя CP300
Подробные настройки для тембров –
редактирование тембра
Вы можете установить детальные настройки для тембра. можно установить эти настройки для каждого
тембра (или каждой комбинации тембров) индивидуально.
Редактирование тембра – основные операции
1
Выберите желаемый тембр или комбинацию тембров
Инструкцию по выбору тембра см. на стр. 25
2
Нажмите кнопку �V�IC� �DI�� , чтобы войти в меню редактирования тембра
3
С помощью кнопок � �–��+� выберите часть, для которой вы хотите изменить тембр
Диапазон отображаемой части отличается в зависимости от выбранного тембра
Voice P��t – часть тембра Displ��� – дисплей Setup – установка
Main – основная
CP300 Owner’s Manual 56
Ref
erence
Detailed Settings for the Voices—Voice Edit
You can make detailed settings for Voice. You can make these settings for each Voice (or each combination of Voices)
individually.
1
Select the desired Voice or combination of Voices.
For instructions on how to select a Voice, see page 25.
2
Press the [VOICE EDIT] button to access the Voice Edit menu.
3
Use the A [–][+] buttons to select the part for which you wish to change the Voice.
The range of the displayed part varies depending on the selected Voice.
n For details about the split point settings between the Main part and Left part, refer to the “To Change the Split
Point Setting” (page 32) or the “Split Point” parameter in the Other Settings menu (page 69). The split point
settings for the Layer part and Left Layer part can be changed via the “Split Point 2” parameter in the Other
Settings menu (page 69).
For information about the parameters and their values, refer to “Parameters” on page 58.
Voice Edit—Basic Operation
Voice Part Display Setup
MAIN Voices (displayed with a single
Voice or in Split mode)
The Main part Voice can be set.
Displayed when the MAIN side is in
Dual mode
The Main part Voice and Layer
part Voice can be set.
Displayed in Split mode
The Left part Voice can be set.
Displayed when the LEFT side is in Dual
mode
The Left part Voice and Left
Layer Voice can be set.
Main
Main Set?-->
Octave 0
Main x Layer
MainXLayer Set?-->
Octave(GrndPno1) 0
Left
Left Set?-->
Octave 0
Left x Left Layer
LeftXLeftLayer Set?-->
Octave(GrndPno1) 0
MAIN Voices (displayed with a Voices (displayed with a Voices (displayed with a (displayed with a displayed with a with a with a aa
single Voice or in Split mode) Voice or in Split mode) Voice or in Split mode) or in Split mode) or in Split mode) in Split mode) in Split mode) Split mode) Split mode) mode) mode))
– основные тембры (пред-
ставлены одним тембром
или в разделённом режиме)
The Main part Voice can �e Main part Voice can �e Main part Voice can �e part Voice can �e part Voice can �e Voice can �e Voice can �e can �e can �e �e �e
set. – может быть уста- . – может быть уста-
новлен тембр для главной
части
Main �� Layer – основная и �� Layer – основная и �� Layer – основная и Layer – основная и Layer – основная и – основная и
объединенная
CP300 Owner’s Manual
56
Ref
erence
Detailed Settings for the Voices—Voice Edit
You can make detailed settings for Voice. You can make these settings for each Voice (or each combination of Voices)
individually.
1
Select the desired Voice or combination of Voices.
For instructions on how to select a Voice, see page 25.
2
Press the [VOICE EDIT] button to access the Voice Edit menu.
3
Use the A [–][+] buttons to select the part for which you wish to change the Voice.
The range of the displayed part varies depending on the selected Voice.
n For details about the split point settings between the Main part and Left part, refer to the “To Change the Split
Point Setting” (page 32) or the “Split Point” parameter in the Other Settings menu (page 69). The split point
settings for the Layer part and Left Layer part can be changed via the “Split Point 2” parameter in the Other
Settings menu (page 69).
For information about the parameters and their values, refer to “Parameters” on page 58.
Voice Edit—Basic Operation
Voice Part Display Setup
MAIN Voices (displayed with a single
Voice or in Split mode)
The Main part Voice can be set.
Displayed when the MAIN side is in
Dual mode
The Main part Voice and Layer
part Voice can be set.
Displayed in Split mode
The Left part Voice can be set.
Displayed when the LEFT side is in Dual
mode
The Left part Voice and Left
Layer Voice can be set.
Main
Main Set?-->
Octave 0
Main x Layer
MainXLayer Set?-->
Octave(GrndPno1) 0
Left
Left Set?-->
Octave 0
Left x Left Layer
LeftXLeftLayer Set?-->
Octave(GrndPno1) 0
Displayed when the MAIN when the MAIN when the MAIN the MAIN the MAIN MAIN MAIN
side is in Dual mode – отоб- is in Dual mode – отоб- is in Dual mode – отоб- in Dual mode – отоб- in Dual mode – отоб- Dual mode – отоб-
ражается, когда основная
сторона находится в сдво-
енном режиме
The Main part Voice and
Layer part Voice can �e set.
- может быть установлен
может быть установлен быть установлен быть установлен установлен установлен
тембр для главной и объ- для главной и объ- для главной и объ- главной и объ- главной и объ- и объ- и объ- объ- объ-
единенной части части части
Left – левая левая
CP300 Owner’s Manual
56
Ref
erence
Detailed Settings for the Voices—Voice Edit
You can make detailed settings for Voice. You can make these settings for each Voice (or each combination of Voices)
individually.
1
Select the desired Voice or combination of Voices.
For instructions on how to select a Voice, see page 25.
2
Press the [VOICE EDIT] button to access the Voice Edit menu.
3
Use the A [–][+] buttons to select the part for which you wish to change the Voice.
The range of the displayed part varies depending on the selected Voice.
n For details about the split point settings between the Main part and Left part, refer to the “To Change the Split
Point Setting” (page 32) or the “Split Point” parameter in the Other Settings menu (page 69). The split point
settings for the Layer part and Left Layer part can be changed via the “Split Point 2” parameter in the Other
Settings menu (page 69).
For information about the parameters and their values, refer to “Parameters” on page 58.
Voice Edit—Basic Operation
Voice Part Display Setup
MAIN Voices (displayed with a single
Voice or in Split mode)
The Main part Voice can be set.
Displayed when the MAIN side is in
Dual mode
The Main part Voice and Layer
part Voice can be set.
Displayed in Split mode
The Left part Voice can be set.
Displayed when the LEFT side is in Dual
mode
The Left part Voice and Left
Layer Voice can be set.
Main
Main Set?-->
Octave 0
Main x Layer
MainXLayer Set?-->
Octave(GrndPno1) 0
Left
Left Set?-->
Octave 0
Left x Left Layer
LeftXLeftLayer Set?-->
Octave(GrndPno1) 0
Displayed in Split mode
– отображается в разделён-
ном режиме
The Left part Voice can �e Left part Voice can �e Left part Voice can �e part Voice can �e part Voice can �e Voice can �e Voice can �e can �e can �e �e �e
set. - может быть установ- . - может быть установ-
лен тембр для левой части
Left �� Left Layer – левая и
левая объединенная
CP300 Owner’s Manual 56
Ref
erence
Detailed Settings for the Voices—Voice Edit
You can make detailed settings for Voice. You can make these settings for each Voice (or each combination of Voices)
individually.
1
Select the desired Voice or combination of Voices.
For instructions on how to select a Voice, see page 25.
2
Press the [VOICE EDIT] button to access the Voice Edit menu.
3
Use the A [–][+] buttons to select the part for which you wish to change the Voice.
The range of the displayed part varies depending on the selected Voice.
n For details about the split point settings between the Main part and Left part, refer to the “To Change the Split
Point Setting” (page 32) or the “Split Point” parameter in the Other Settings menu (page 69). The split point
settings for the Layer part and Left Layer part can be changed via the “Split Point 2” parameter in the Other
Settings menu (page 69).
For information about the parameters and their values, refer to “Parameters” on page 58.
Voice Edit—Basic Operation
Voice Part Display Setup
MAIN Voices (displayed with a single
Voice or in Split mode)
The Main part Voice can be set.
Displayed when the MAIN side is in
Dual mode
The Main part Voice and Layer
part Voice can be set.
Displayed in Split mode
The Left part Voice can be set.
Displayed when the LEFT side is in Dual
mode
The Left part Voice and Left
Layer Voice can be set.
Main
Main Set?-->
Octave 0
Main x Layer
MainXLayer Set?-->
Octave(GrndPno1) 0
Left
Left Set?-->
Octave 0
Left x Left Layer
LeftXLeftLayer Set?-->
Octave(GrndPno1) 0
Displayed when the LEFT side
is in Dual mode – отобра-
– отобра-
жается, когда левая часть
находится в сдвоенном
режиме
The Left part Voice and Left Left part Voice and Left Left part Voice and Left part Voice and Left part Voice and Left Voice and Left Voice and Left and Left and Left Left Left
Layer Voice can �e set. - мо- Voice can �e set. - мо- Voice can �e set. - мо- can �e set. - мо- can �e set. - мо- �e set. - мо- �e set. - мо- set. - мо- set. - мо- . - мо-
жет быть установлен тембр
для левой части и левой
объединенной части