Qu�lize� lock, Cto��� set, Equalizerlock off – Инструкция по эксплуатации Yamaha CP300
Страница 71: Factory set, Настройки для, Выбор для хранилища памяти
Руководство пользователя CP300
�qu�lize� Lock
Позволяет заблокировать настройки общего эквалай-
зера и запретить менять их во время выбора пара-
метров исполнения или с помощью воспроизведения
песни и входящих M�D� данных.
M�D� данных.
данных.
Однако, если принят массив данных (текущего типа),
настройки общего эквалайзера изменятся, несмотря
на то, включена ли функция
“�qualizer �ock”
или нет
(смотрите часть о параметре
Bulk Dump
на стр. 66)
Miscellaneous CP300 Settings—Other Settings
CP300 Owner’s Manual
71
Ref
erence
This allows you to lock the Master Equalizer settings and
prevent them from being changed when selecting a
Performance, or by Song playback and incoming MIDI
data.
However, if bulk data (of the Current type) is received, the
Master Equalizer settings will be changed, no matter
whether the "Equalizer Lock" is turned on or off. (See Bulk
Dump in the MIDI Settings on page 66.)
Setting range: On/Off
Default setting: On
This allows you to select specific items and parameters, such
as Voice selection and reverb type, to be automatically saved
upon shutdown, ensuring that they will not be lost when
you turn off the power to the CP300.
If the backup function is turned on for an item, the settings
for that item when power is turned off will be in effect the
next time power is turned on. If the backup function is
turned off for an item, the settings in memory are erased
when you turn off the power. In this case, when you turn
on the power to the unit, the default settings (the initial
settings) will be used. Refer to the “Factory Setting List” on
page 101.
Keep in mind that the backup settings themselves, the files
of the storage memory, and Character Code setting
(page 84) are always saved upon shutdown.
Setting for:
Default setting: The Transpose, Main/LeftVoice and
OtherSetting parameters are set to Off. Other parameters are set
to On.
This allows you to reset the CP300 to its default settings.
• The “Character Code” parameter setting does not change
(page 84).
• The “Memory Backup” parameter setting (On/Off) is
reset to the default setting (left column).
• You can specify whether the files in the storage memory
are erased or kept.
Never attempt to turn off the power during factory set. Doing so
could result in damage to the data.
Selecting for storage memory:
Equalizer Lock
Memory Backup
Master
Master settings (page 53)
Transpose
Transpose settings (page 69)
Equalizer
Master Equalizer settings (page 72)
ReverbOnOff
Reverb on or off (page 35)
SplitPoint
Split Point settings (page 69)
Main/LeftVoice
Voice, Keyboard part combinations
(page 27)
SongSetting
Settings for Song recording and playback
(page 85)
MidiSetting
MIDI Settings (page 63)
OtherSetting
Other Settings (page 67)
EqualizerLock
Off
NO
YES
A
B
D
C
MemoryBackUp
Transpose Off
NO
YES
A
B
D
C
Selects the desired item
Selects on or off
Factory Set
MemoryFileExcluded
Memory Songs are kept.
MemoryFileIncluded
Memory Songs are erased.
CAUTION
FactorySet Execute?-->
MemoryFileExcluded
NO
YES
A
B
D
C
Resets the CP300
Selects whether the memory files
are erased or kept
диапазон настроек: вкл/выкл
Настройка по умолчанию: вкл
Memo��� ��ckup
Позволяет выбрать автоматическое сохранение
отдельных параметров и пунктов после выключения,
таких как выбор тембра и тип искусственного эха,
для того, чтобы эти настройки не были потеряны
после того, как вы отключите инструмент.
если для какого-то пункта включена функция дубли-
рования, настройки для него сохранятся даже если
выключить инструмент. если функция дублирования
выключена, настройки удаляются из памяти после
выключения инструмента. В этом случае если вы
включите инструмент, то будут использованы пер-
воначальные настройки (настройки по умолчанию).
Посмотрите список заводских настроек на стр. 1�1.
Помните, что сами по себе резервные настройки,
файлы хранилища памяти и настройки типа симво-
лов всегда сохраняются перед выключением.
Miscellaneous CP300 Settings—Other Settings
CP300 Owner’s Manual
71
Ref
erence
This allows you to lock the Master Equalizer settings and
prevent them from being changed when selecting a
Performance, or by Song playback and incoming MIDI
data.
However, if bulk data (of the Current type) is received, the
Master Equalizer settings will be changed, no matter
whether the "Equalizer Lock" is turned on or off. (See Bulk
Dump in the MIDI Settings on page 66.)
Setting range: On/Off
Default setting: On
This allows you to select specific items and parameters, such
as Voice selection and reverb type, to be automatically saved
upon shutdown, ensuring that they will not be lost when
you turn off the power to the CP300.
If the backup function is turned on for an item, the settings
for that item when power is turned off will be in effect the
next time power is turned on. If the backup function is
turned off for an item, the settings in memory are erased
when you turn off the power. In this case, when you turn
on the power to the unit, the default settings (the initial
settings) will be used. Refer to the “Factory Setting List” on
page 101.
Keep in mind that the backup settings themselves, the files
of the storage memory, and Character Code setting
(page 84) are always saved upon shutdown.
Setting for:
Default setting: The Transpose, Main/LeftVoice and
OtherSetting parameters are set to Off. Other parameters are set
to On.
This allows you to reset the CP300 to its default settings.
• The “Character Code” parameter setting does not change
(page 84).
• The “Memory Backup” parameter setting (On/Off) is
reset to the default setting (left column).
• You can specify whether the files in the storage memory
are erased or kept.
Never attempt to turn off the power during factory set. Doing so
could result in damage to the data.
Selecting for storage memory:
Equalizer Lock
Memory Backup
Master
Master settings (page 53)
Transpose
Transpose settings (page 69)
Equalizer
Master Equalizer settings (page 72)
ReverbOnOff
Reverb on or off (page 35)
SplitPoint
Split Point settings (page 69)
Main/LeftVoice
Voice, Keyboard part combinations
(page 27)
SongSetting
Settings for Song recording and playback
(page 85)
MidiSetting
MIDI Settings (page 63)
OtherSetting
Other Settings (page 67)
EqualizerLock
Off
NO
YES
A
B
D
C
MemoryBackUp
Transpose Off
NO
YES
A
B
D
C
Selects the desired item
Selects on or off
Factory Set
MemoryFileExcluded
Memory Songs are kept.
MemoryFileIncluded
Memory Songs are erased.
CAUTION
FactorySet Execute?-->
MemoryFileExcluded
NO
YES
A
B
D
C
Resets the CP300
Selects whether the memory files
are erased or kept
выбор требуемого пункта
включает его или
требуемого пункта
включает его или
требуемого пункта
включает его или
пункта
включает его или
пункта
включает его или
отключает.
Настройки для:
Master
настройки мастер-режима
(стр. 53)
Transpose
настройки транспонирования
(стр. 69)
Equalizer
настройки общего эквалайзера
(стр. 72)
Rever�OnOff
включение/выкл искусственного
эха (стр. 35)
SplitPoint
установки точки разделения
(стр. 69)
Main/LeftVoice комбинации тембров для частей
клавиатуры (стр. 27)
SongSetting
настройки для записи и воспроиз-
ведения песни (стр. 85)
MidiSetting
настройки для MIDI (стр. 63)
MIDI (стр. 63)
(стр. 63)
OtherSetting
другие настройки (стр. 67)
Настройки по умолчанию: The Transpose, Main/
LeftVoice и OtherSetting выключены. Остальные па-
раметры включены.
��cto��� Set
Позволяет сбросить настройки инструмента до фаб-
ричных настроек
• Параметр
“�haracter �ode” не меняется (стр. 84)
• Установки параметра “Memor�� Backup” (вкл/выкл)
сбрасываются до значения по умолчанию (левая
колонка)
• Вы можете выбрать, удалять или сохранять файлы
в хранилище памяти.
B
ВНИМАНИЕ!
никогда не выключайте инструмент во время
сбрасывания настроек к заводским настройкам.
Это может повредить данные.
сбрасывает настройки инструмента
Miscellaneous CP300 Settings—Other Settings
CP300 Owner’s Manual
71
Ref
erence
This allows you to lock the Master Equalizer settings and
prevent them from being changed when selecting a
Performance, or by Song playback and incoming MIDI
data.
However, if bulk data (of the Current type) is received, the
Master Equalizer settings will be changed, no matter
whether the "Equalizer Lock" is turned on or off. (See Bulk
Dump in the MIDI Settings on page 66.)
Setting range: On/Off
Default setting: On
This allows you to select specific items and parameters, such
as Voice selection and reverb type, to be automatically saved
upon shutdown, ensuring that they will not be lost when
you turn off the power to the CP300.
If the backup function is turned on for an item, the settings
for that item when power is turned off will be in effect the
next time power is turned on. If the backup function is
turned off for an item, the settings in memory are erased
when you turn off the power. In this case, when you turn
on the power to the unit, the default settings (the initial
settings) will be used. Refer to the “Factory Setting List” on
page 101.
Keep in mind that the backup settings themselves, the files
of the storage memory, and Character Code setting
(page 84) are always saved upon shutdown.
Setting for:
Default setting: The Transpose, Main/LeftVoice and
OtherSetting parameters are set to Off. Other parameters are set
to On.
This allows you to reset the CP300 to its default settings.
• The “Character Code” parameter setting does not change
(page 84).
• The “Memory Backup” parameter setting (On/Off) is
reset to the default setting (left column).
• You can specify whether the files in the storage memory
are erased or kept.
Never attempt to turn off the power during factory set. Doing so
could result in damage to the data.
Selecting for storage memory:
Equalizer Lock
Memory Backup
Master
Master settings (page 53)
Transpose
Transpose settings (page 69)
Equalizer
Master Equalizer settings (page 72)
ReverbOnOff
Reverb on or off (page 35)
SplitPoint
Split Point settings (page 69)
Main/LeftVoice
Voice, Keyboard part combinations
(page 27)
SongSetting
Settings for Song recording and playback
(page 85)
MidiSetting
MIDI Settings (page 63)
OtherSetting
Other Settings (page 67)
EqualizerLock
Off
NO
YES
A
B
D
C
MemoryBackUp
Transpose Off
NO
YES
A
B
D
C
Selects the desired item
Selects on or off
Factory Set
MemoryFileExcluded
Memory Songs are kept.
MemoryFileIncluded
Memory Songs are erased.
CAUTION
FactorySet Execute?-->
MemoryFileExcluded
NO
YES
A
B
D
C
Resets the CP300
Selects whether the memory files
are erased or kept
выбрать, удалять или сохранять файлы
, удалять или сохранять файлы
удалять или сохранять файлы
или сохранять файлы
или сохранять файлы
сохранять файлы
сохранять файлы
файлы
файлы
в хранилище памяти.
хранилище памяти.
хранилище памяти.
памяти.
памяти..
Выбор для хранилища памяти:
MemoryFileE��cluded
файлы в хранилище сохра-
няются
MemoryFileIncluded
файлы в хранилище удаля-
ются
Различные настройки инструмента – другие настройки