Yamaha CP300 - Инструкция (Страница 69)

Руководство пользователя CP300 9
Werckmeister,
Kirn�erger
эти шкалы стали улучшением преды-
дущих двух шкал. Отличной их чертой
является то, что каждая клавиша
имеет свой уникальный характер.
Шкалами широко пользовались во
времена Баха и Бетховена, и даже в
наше время ими часто пользуются во
время игры на клавесине.
диапазон настройки: C, C#, D, E�, E, F, F#, G, A�,
A, B�, B
Для всех шкал, кроме шкалы Equal, корневая нота
должна быть определена с помощью кнопок B
[– (NO)]/[+ (YES)]
Настройка по умолчанию: Equal
Split Point
Позволяет определить точку разделения (границу на
клавиатуре между основной и левой частями).
Miscellaneous CP300 Settings—Other Settings
CP300 Owner’s Manual
69
Ref
erence
This allows you to specify the split point (the boundary on
the keyboard separating the Main part and Left part).
Setting range: A-1 – C7
Default setting: F
#2
This allows you to specify the secondary split point (the
boundary on the keyboard separating the Layer part and
Left Layer part).
Setting range: A-1 – C7
Default setting: F
#2
The CP300’s Transpose function makes it possible to shift
the pitch of the entire keyboard up or down in semitone
intervals to facilitate playing in difficult key signatures, and
to let you easily match the pitch of the keyboard to the
range of a singer or other instruments.
Setting targets:
Setting range: -12 – 0 – +12
-12 (-1 octave) – 0 (normal pitch) – +12 (+1 octave)
Default setting: Keyboard = 0, Song = 0
n The Keyboard settings can only be made when the
[TRANSPOSE] button is turned on (page 37).
n You can also change the keyboard Transpose setting by
using the [TRANSPOSE] button. Whichever method
you use, the most recently made settings will be effective.
n The Transpose setting affects transmitted MIDI data.
This allows you to specify the depth of the soft pedal effect.
Setting range: 1 – 10
Default setting: 5
This parameter sets the amount or depth of the String
Resonance sound and is effective on certain Voice, such as
Grand Piano 1.
Setting range: Off, 1 – 10
Default setting: 5
This parameter sets the amount or depth of the Sustain
Sampling sound and is effective on the Mono Piano 1 and
Comp. Piano 1 Voices, as well as on the Grand Piano 1
Voice group.
Setting range: Off, 1 – 10
Default setting: 5
Split Point
Split Point 2
Transpose
Keyboard The sound you play with the keys
Song The sound of Song playback
SplitPoint(Main)
F#2
NO YES
A B
D C
SplitPoint(Layer)
F#2
NO YES
A B
D C
Transpose
Keyboard 0
NO YES
A B
D C
Soft Pedal Depth
String Resonance Depth
Sustain Sampling Depth
SoftPedalDepth
5
NO YES
A B
D C
StringResonanceDepth
5
NO YES
A B
D C
SustainSamplingDepth
5
NO YES
A B
D C
диапазон настройки: A-1 – C7
Настройка по умолчанию: F#2
Split Point 
Позволяет определить дополнительную точку разде-
ления (границу на клавиатуре между объединённой и
левой объединённой частями).
Miscellaneous CP300 Settings—Other Settings
CP300 Owner’s Manual
69
Ref
erence
This allows you to specify the split point (the boundary on
the keyboard separating the Main part and Left part).
Setting range: A-1 – C7
Default setting: F
#2
This allows you to specify the secondary split point (the
boundary on the keyboard separating the Layer part and
Left Layer part).
Setting range: A-1 – C7
Default setting: F
#2
The CP300’s Transpose function makes it possible to shift
the pitch of the entire keyboard up or down in semitone
intervals to facilitate playing in difficult key signatures, and
to let you easily match the pitch of the keyboard to the
range of a singer or other instruments.
Setting targets:
Setting range: -12 – 0 – +12
-12 (-1 octave) – 0 (normal pitch) – +12 (+1 octave)
Default setting: Keyboard = 0, Song = 0
n The Keyboard settings can only be made when the
[TRANSPOSE] button is turned on (page 37).
n You can also change the keyboard Transpose setting by
using the [TRANSPOSE] button. Whichever method
you use, the most recently made settings will be effective.
n The Transpose setting affects transmitted MIDI data.
This allows you to specify the depth of the soft pedal effect.
Setting range: 1 – 10
Default setting: 5
This parameter sets the amount or depth of the String
Resonance sound and is effective on certain Voice, such as
Grand Piano 1.
Setting range: Off, 1 – 10
Default setting: 5
This parameter sets the amount or depth of the Sustain
Sampling sound and is effective on the Mono Piano 1 and
Comp. Piano 1 Voices, as well as on the Grand Piano 1
Voice group.
Setting range: Off, 1 – 10
Default setting: 5
Split Point
Split Point 2
Transpose
Keyboard The sound you play with the keys
Song The sound of Song playback
SplitPoint(Main)
F#2
NO YES
A B
D C
SplitPoint(Layer)
F#2
NO YES
A B
D C
Transpose
Keyboard 0
NO YES
A B
D C
Soft Pedal Depth
String Resonance Depth
Sustain Sampling Depth
SoftPedalDepth
5
NO YES
A B
D C
StringResonanceDepth
5
NO YES
A B
D C
SustainSamplingDepth
5
NO YES
A B
D C
диапазон настройки: A-1 – C7
Настройка по умолчанию: F#2
���nspose
функция транспонирования инструмента позволяет
менять высоту звучания всех клавиш вверх или вниз
с интервалом в полтона для того, чтобы было легче
проигрывать объединенные соединения полутонов,
и чтобы дать возможность без трудностей подогнать
высоту звучания нот к диапазону голоса певца или
другого инструмента.
Miscellaneous CP300 Settings—Other Settings
CP300 Owner’s Manual 69
Ref
erence
This allows you to specify the split point (the boundary on
the keyboard separating the Main part and Left part).
Setting range: A-1 – C7
Default setting: F
#2
This allows you to specify the secondary split point (the
boundary on the keyboard separating the Layer part and
Left Layer part).
Setting range: A-1 – C7
Default setting: F
#2
The CP300’s Transpose function makes it possible to shift
the pitch of the entire keyboard up or down in semitone
intervals to facilitate playing in difficult key signatures, and
to let you easily match the pitch of the keyboard to the
range of a singer or other instruments.
Setting targets:
Setting range: -12 – 0 – +12
-12 (-1 octave) – 0 (normal pitch) – +12 (+1 octave)
Default setting: Keyboard = 0, Song = 0
n The Keyboard settings can only be made when the
[TRANSPOSE] button is turned on (page 37).
n You can also change the keyboard Transpose setting by
using the [TRANSPOSE] button. Whichever method
you use, the most recently made settings will be effective.
n The Transpose setting affects transmitted MIDI data.
This allows you to specify the depth of the soft pedal effect.
Setting range: 1 – 10
Default setting: 5
This parameter sets the amount or depth of the String
Resonance sound and is effective on certain Voice, such as
Grand Piano 1.
Setting range: Off, 1 – 10
Default setting: 5
This parameter sets the amount or depth of the Sustain
Sampling sound and is effective on the Mono Piano 1 and
Comp. Piano 1 Voices, as well as on the Grand Piano 1
Voice group.
Setting range: Off, 1 – 10
Default setting: 5
Split Point
Split Point 2
Transpose
Keyboard The sound you play with the keys
Song The sound of Song playback
SplitPoint(Main)
F#2
NO YES
A B
D C
SplitPoint(Layer)
F#2
NO YES
A B
D C
Transpose
Keyboard 0
NO YES
A B
D C
Soft Pedal Depth
String Resonance Depth
Sustain Sampling Depth
SoftPedalDepth
5
NO YES
A B
D C
StringResonanceDepth
5
NO YES
A B
D C
SustainSamplingDepth
5
NO YES
A B
D C
Объекты настройки:
Key�oard звук, который инструмент издаёт
при нажатии клавиш
Song звучание воспроизводимой песни
диапазон настройки: -12 – 0 – +12
-12 (-1 октава) 0 (нормальная высота) +12 (+1 окта-
ва)
Настройки по умолчанию: Key�oard = 0, Song = 0
ПРИМЕЧАНИЕ
настройки клавиатуры можно делать
только тогда, когда светится кнопка
[��ANSP�S�].
ПРИМЕЧАНИЕ
вы также можете менять настройки
транспонирования инструмента с помо-
щью кнопки [��ANSP�S�]. какой бы
метод вы не испо льзовали, применяться
будут самые последние изменения.
ПРИМЕЧАНИЕ
настройки транспонирования влияют на
передачу M�D� данных. M�D� данных. данных.
Soft Ped�l Depth
Позволяет изменить глубину эффекта софт-педали
Miscellaneous CP300 Settings—Other Settings
CP300 Owner’s Manual
69
Ref
erence
This allows you to specify the split point (the boundary on
the keyboard separating the Main part and Left part).
Setting range: A-1 – C7
Default setting: F
#2
This allows you to specify the secondary split point (the
boundary on the keyboard separating the Layer part and
Left Layer part).
Setting range: A-1 – C7
Default setting: F
#2
The CP300’s Transpose function makes it possible to shift
the pitch of the entire keyboard up or down in semitone
intervals to facilitate playing in difficult key signatures, and
to let you easily match the pitch of the keyboard to the
range of a singer or other instruments.
Setting targets:
Setting range: -12 – 0 – +12
-12 (-1 octave) – 0 (normal pitch) – +12 (+1 octave)
Default setting: Keyboard = 0, Song = 0
n The Keyboard settings can only be made when the
[TRANSPOSE] button is turned on (page 37).
n You can also change the keyboard Transpose setting by
using the [TRANSPOSE] button. Whichever method
you use, the most recently made settings will be effective.
n The Transpose setting affects transmitted MIDI data.
This allows you to specify the depth of the soft pedal effect.
Setting range: 1 – 10
Default setting: 5
This parameter sets the amount or depth of the String
Resonance sound and is effective on certain Voice, such as
Grand Piano 1.
Setting range: Off, 1 – 10
Default setting: 5
This parameter sets the amount or depth of the Sustain
Sampling sound and is effective on the Mono Piano 1 and
Comp. Piano 1 Voices, as well as on the Grand Piano 1
Voice group.
Setting range: Off, 1 – 10
Default setting: 5
Split Point
Split Point 2
Transpose
Keyboard The sound you play with the keys
Song The sound of Song playback
SplitPoint(Main)
F#2
NO YES
A B
D C
SplitPoint(Layer)
F#2
NO YES
A B
D C
Transpose
Keyboard 0
NO YES
A B
D C
Soft Pedal Depth
String Resonance Depth
Sustain Sampling Depth
SoftPedalDepth
5
NO YES
A B
D C
StringResonanceDepth
5
NO YES
A B
D C
SustainSamplingDepth
5
NO YES
A B
D C
диапазон настроек: 1 – 10
Настройка по умолчанию: 5
St�ing �eson�nce Depth
Этот параметр устанавливает размер или глубину
звука резонанса струн и эффективен для определён-
ного тембра, например, Рояль 1.
Miscellaneous CP300 Settings—Other Settings
CP300 Owner’s Manual
69
Ref
erence
This allows you to specify the split point (the boundary on
the keyboard separating the Main part and Left part).
Setting range: A-1 – C7
Default setting: F
#2
This allows you to specify the secondary split point (the
boundary on the keyboard separating the Layer part and
Left Layer part).
Setting range: A-1 – C7
Default setting: F
#2
The CP300’s Transpose function makes it possible to shift
the pitch of the entire keyboard up or down in semitone
intervals to facilitate playing in difficult key signatures, and
to let you easily match the pitch of the keyboard to the
range of a singer or other instruments.
Setting targets:
Setting range: -12 – 0 – +12
-12 (-1 octave) – 0 (normal pitch) – +12 (+1 octave)
Default setting: Keyboard = 0, Song = 0
n The Keyboard settings can only be made when the
[TRANSPOSE] button is turned on (page 37).
n You can also change the keyboard Transpose setting by
using the [TRANSPOSE] button. Whichever method
you use, the most recently made settings will be effective.
n The Transpose setting affects transmitted MIDI data.
This allows you to specify the depth of the soft pedal effect.
Setting range: 1 – 10
Default setting: 5
This parameter sets the amount or depth of the String
Resonance sound and is effective on certain Voice, such as
Grand Piano 1.
Setting range: Off, 1 – 10
Default setting: 5
This parameter sets the amount or depth of the Sustain
Sampling sound and is effective on the Mono Piano 1 and
Comp. Piano 1 Voices, as well as on the Grand Piano 1
Voice group.
Setting range: Off, 1 – 10
Default setting: 5
Split Point
Split Point 2
Transpose
Keyboard The sound you play with the keys
Song The sound of Song playback
SplitPoint(Main)
F#2
NO YES
A B
D C
SplitPoint(Layer)
F#2
NO YES
A B
D C
Transpose
Keyboard 0
NO YES
A B
D C
Soft Pedal Depth
String Resonance Depth
Sustain Sampling Depth
SoftPedalDepth
5
NO YES
A B
D C
StringResonanceDepth
5
NO YES
A B
D C
SustainSamplingDepth
5
NO YES
A B
D C
диапазон настроек: выкл, 1 – 10
Настройка по умолчанию: 5
Sust�in S�mpling Depth
Этот параметр устанавливает размер или глубину
звука сэмпла с эффектом сустейн и эффективен для
таких тембров, как монофортепиано 1 и компью-
терное фортепиано 1, а также для группы тембров
Рояль 1.
Miscellaneous CP300 Settings—Other Settings
CP300 Owner’s Manual
69
Ref
erence
This allows you to specify the split point (the boundary on
the keyboard separating the Main part and Left part).
Setting range: A-1 – C7
Default setting: F
#2
This allows you to specify the secondary split point (the
boundary on the keyboard separating the Layer part and
Left Layer part).
Setting range: A-1 – C7
Default setting: F
#2
The CP300’s Transpose function makes it possible to shift
the pitch of the entire keyboard up or down in semitone
intervals to facilitate playing in difficult key signatures, and
to let you easily match the pitch of the keyboard to the
range of a singer or other instruments.
Setting targets:
Setting range: -12 – 0 – +12
-12 (-1 octave) – 0 (normal pitch) – +12 (+1 octave)
Default setting: Keyboard = 0, Song = 0
n The Keyboard settings can only be made when the
[TRANSPOSE] button is turned on (page 37).
n You can also change the keyboard Transpose setting by
using the [TRANSPOSE] button. Whichever method
you use, the most recently made settings will be effective.
n The Transpose setting affects transmitted MIDI data.
This allows you to specify the depth of the soft pedal effect.
Setting range: 1 – 10
Default setting: 5
This parameter sets the amount or depth of the String
Resonance sound and is effective on certain Voice, such as
Grand Piano 1.
Setting range: Off, 1 – 10
Default setting: 5
This parameter sets the amount or depth of the Sustain
Sampling sound and is effective on the Mono Piano 1 and
Comp. Piano 1 Voices, as well as on the Grand Piano 1
Voice group.
Setting range: Off, 1 – 10
Default setting: 5
Split Point
Split Point 2
Transpose
Keyboard The sound you play with the keys
Song The sound of Song playback
SplitPoint(Main)
F#2
NO YES
A B
D C
SplitPoint(Layer)
F#2
NO YES
A B
D C
Transpose
Keyboard 0
NO YES
A B
D C
Soft Pedal Depth
String Resonance Depth
Sustain Sampling Depth
SoftPedalDepth
5
NO YES
A B
D C
StringResonanceDepth
5
NO YES
A B
D C
SustainSamplingDepth
5
NO YES
A B
D C
диапазон настроек: выкл, 1 – 10
Настройка по умолчанию: 5
Различные настройки инструмента – другие настройки