DeLonghi TGX 664GHI - Инструкция (Страница 44)

44
N.B. For connection to the mains,
do not use adapters, reducers or
branching devices as they can cause
overheating and burning.
If the installation requires alterations to
the domestic electrical system, call an
expert.
He should also check that the electrical
system is suitable for the power absorbed
by the appliance.
GENERAL
– Connection to the mains must be
carried out by qualified personnel in
accordance with current regulations.
– The appliance must be connected
to the mains checking that the volt-
age corresponds to the value given in
the rating plate and that the electrical
cable sections can withstand the load
specified on the plate.
– The appliance is supplied without a
power supply plug and therefore if
you are not connecting directly to the
mains, a standardized plug suitable
for the load must be fitted.
– The plug must be connected to an
earthed socket in compliance with
safety standards.
– The appliance can be connect-
ed directly to the mains placing an
omnipolar switch with minimum open-
ing between the contacts of 3 mm
between the appliance and the mains.
– The power supply cable must not
touch the hot parts and must be posi-
tioned so that it does not exceed 75°C
at any point.
– Once the appliance has been
installed, the switch or socket must
always be accessible.
– If the power supply cable is damaged it
must be substituted by a suitable cable
available in the after sales service.
ELECTRICAL SECTION
9
IMPORTANT: The appliance must be
installed in accordance with the man-
ufacturer’s instructions.
Incorrect installation, for which the
manufacturer accepts no responsibil-
ity, may cause damage to persons,
animals and things.
The connection of the appliance to
earth is mandatory.
The manufacturer declines all respon-
sibility for any inconvenience result-
ing from the inobservance of this con-
dition.