Kastor K0-20 Wood-burning sauna stoves - Инструкция (Страница 36)

EN
gl
ISH
TAblE Of cONTENTS
1. bEFORE YOU INSTALL
1.1. Package contents and its inspection
1.2. Important matters and regulations
1.3. Installation of water tank VK-20
2. INSTALLATION AND PREPARATION FOR USE
2.1. Preparing for use and burn-in
2.2. Stones and their arrangement
2.3. Stove base
2.3.1. Installation on wooden floor with a cast concrete base
2.3.2. Installation on tiled and waterproof floor
2.4. Safety distances and protections
2.4.1. Safety distances
2.4.2. Reduction of safety distances
2.5.1. Connecting from the back
2.5.2. Connecting from the top
2.6. Connecting to a Kastor chimney
2.7. Stove door and changing the opening direction
2.8. Air guide plate
2.9. General directions to prevent damage
3. USING THE STOVE
3.1. Fuel
3.2. Usage with VK-20 water tank
3.3. Adjusting the air flow
3.4. Adjusting the heat output
3.4.1. A sauna bath on just one load of wood, lighting from below
3.4.2. A sauna bath on just one load of wood, lighting from above
3.4.3. Continuing the heating with a second load
4. MAINTENANCE
4.1. Cleaning the stove
4.2. Ash removal
4.3. Sweeping the stove
4.4. Removal and cleaning of the KH model’s elevator door glass
5. PRObLEM SITUATIONS
6. WARRANTY AND MANUFACTURER IDENTIFICATION
This installation and user’s manual was last updated 16 September 2008.