Yamaha RX-V665 - Инструкция (Страница 56)

54
En
Controlling other components with the remote control
You can clear the assignment of each key.
1
Press dCODE SET on the remote control
using a pointed object such as the tip of a
ballpoint pen.
cTRANSMIT on the remote control blinks twice.
2
Press hInput selection keys to select the
input source whose assigned function you
want to reset.
3
Enter “9991” using tNumeric keys.
4
Press the key that you want to reset.
The assignment to that key is cleared. When the
assignment is cleared successfully, cTRANSMIT
on the remote control blinks twice.
If it fails, cTRANSMIT blinks six times. Repeat
from step 1.
y
• To continue resetting other keys, repeat step 4.
5
To end the reset operation, press dCODE
SET on the remote control using a pointed
object such as the tip of a ballpoint pen.
cTRANSMIT on the remote control blinks once.
You can clear the assignments of all the keys in one go.
1
Press dCODE SET on the remote control
using a pointed object such as the tip of a
ballpoint pen.
cTRANSMIT on the remote control blinks twice.
2
Press hInput selection keys to select the
input source, the function of which is
assigned to the key that you want to reset.
3
Enter “9992” using tNumeric keys.
The assignments of all key are cleared. When the
assignments are cleared successfully,
cTRANSMIT on the remote control blinks twice.
If it fails, cTRANSMIT blinks six times. Repeat
from step 1.
Resetting each key Resetting all keys