Yamaha RX-V665 - Инструкция (Страница 54)

52
En
You can control external components for a selected input source with the remote control. The keys available for
controlling external components are as follows:
eSOURCE POWER
Turns on and off an external component.
oCursor, ENTER, RETURN
Operates the menus of external components.
qDISPLAY
Switches between the screens of external components.
sExternal component operation keys
Function as a recording or playback key of an external
component, or a menu display key.
tNumeric keys
Function as numeric keys of an external component.
uTV control keys
y
• You need to set the remote control code first to control external
components.
• The remote control keys for controlling external components are
available only when the external components have corresponding control
keys.
The following remote control codes are assigned to input
sources as factory default settings. For a complete list of
available remote control codes, refer to “List of remote
control codes” at the end of this manual.
■ Default remote control code settings
“—” indicates no assignment
y
• An external component that is controlled by the remote control can be
automatically selected according to selection of the scenes (see page 22).
You can control other components by setting the
appropriate remote control codes. For a complete list of
available remote control codes, refer to “List of remote
control codes” at the end of this manual.
1
Press dCODE SET on the remote control
using a pointed object such as the tip of a
ballpoint pen.
cTRANSMIT on the remote control blinks twice.
2
Press hInput selection keys.
3
Enter a remote control code using
tNumeric keys.
Once the remote control code is registered,
cTRANSMIT on the remote control blinks twice.
If it fails, cTRANSMIT blinks six times. Repeat
from step 1.
You can clear all the remote control codes previously set,
and reset all of them to the initial factory settings.
1
Press dCODE SET on the remote control
using a pointed object such as a tip of a
ballpoint pen.
cTRANSMIT on the remote control blinks twice.
2
Press mSETUP on the remote control.
3
Enter “9981” using tNumeric keys.
Once the initialization is complete, cTRANSMIT
on the remote control blinks twice. If it fails,
cTRANSMIT blinks six times. Repeat from
step 1.
Controlling other components with the remote control
INPUT Switches visual inputs of TV
MUTE Mute audio of TV
TV VOL +/– Controls the volume of TV
TV CH +/–
Switches channels of TV
POWER Turns on and off TV
Input source Category Manufacturer
Default
code
[HDMI1] Blu-ray Disc Yamaha 2018
[HDMI2] — — —
[HDMI3] — — —
[HDMI4] — — —
[AV1] — — —
[AV2] — — —
[AV3] CD Yamaha 5013
[AV4] — — —
[AV5] — — —
[AV6] — — —
[AUDIO1] — — —
[AUDIO2] — — —
[V-AUX] — — —
[PHONO] — — —
[TUNER] Tuner Yamaha 5007
[DOCK] DOCK Yamaha 5011
[A] — — —
[MULTI CH] — — —
Setting remote control codes
Resetting all remote control codes
Input source Category Manufacturer
Default
code