Displaying input signal information, Changing information on the front panel display, Using the sleep timer – Инструкция по эксплуатации Yamaha RX-V665
Страница 26: Straight
24
En
Playback
When HDMI1-4 or AV1-4 is selected as the input source,
you can display audio/video signal information.
y
• Input signal information is displayed on both a video monitor and the
front panel display.
1
Select the desired input source, and press
nOPTION.
The option menu for the selected input source is
displayed (see page 36).
2
Press oCursor k / n to select “Signal Info,”
and press oENTER.
Information on input signals is displayed. See
page 37 on information displayed on the screen.
Notes
• You can change items of information displayed on the front panel
display using oCursor k / n.
• If an HDMI related error occurs, error information is displayed at
the bottom of the screen.
3
To end the information display, press
nOPTION.
Information displayed on the front panel display can be
changed by pressing EINFO (or jINFO).
The following information can be displayed according to
the input source.
For example, if you select HDMI1 input and display “DSP
Program,” the following screen appears on the front panel
display.
The sleep timer is useful if you want to go to sleep while
this unit is playing or recording a source.
Press fSLEEP repeatedly to set the amount of
time.
Each time you press fSLEEP, the front panel display
changes as shown below.
When the sleep timer is set, the SLEEP indicator on the
front panel display lights up.
Press fSLEEP on the remote control repeatedly until
“Sleep Off” appears on the front panel display.
Displaying input signal information
Changing information on the front
panel display
HDMI1-4:
Input, DSP Program, Audio Decoder
AV1-6:
Input, DSP Program, Audio Decoder
AUDIO1-2:
Input, DSP Program, Audio Decoder
MULTI CH:
Input
V-AUX:
Input, DSP Program, Audio Decoder
PHONO:
Input, DSP Program, Audio Decoder
FM/AM:
Frequency, Program Service, Program
Type, Radio Text, Clock Time, DSP
Program, Audio Decoder
iPod (Simple remote mode): Input, DSP Program, Audio Decoder
iPod (Menu browse mode):
(in PlayInfo displayed) Artist, Album,
Song, DSP Program, Audio Decoder
(in Play menu displayed) List
Bluetooth:
Input, DSP Program, Audio Decoder
Straight
Input source
Sound field program (DSP program)
Using the sleep timer
Sleep 120min.
Sleep 90min.
Sleep 60min.
Sleep 30min.
Sleep Off