Sony DCR-PC101E - Инструкция (Страница 251)

251
Customising Your Camcorder
Выполнение
индивидуальных
установок
на
видеокамере
Changing the menu settings
Icon/item
CM SET
TITLE
TITLEERASE
TITLE DSPL
CM SEARCH
TAPE TITLE
ERASE ALL
TAPE SET
REC MODE
AUDIO MODE
q REMAIN
Mode
——
——
z ON
OFF
z ON
OFF
——
——
z SP
LP
z 12BIT
16BIT
z AUTO
ON
Meaning
To superimpose a title or make your own title
(p. 139, 143)
To erase the title you have superimposed (p. 142)
To display the title you have superimposed
Not to display the title (p. 141)
To search using cassette memory (p. 102, 104, 106)
To search without using cassette memory
(p. 105, 107)
To label a cassette (p. 145)
To erase all the data in cassette memory (p. 147)
To record in the SP (Standard Play) mode
To increase the recording time to 1.5 times the SP
mode
To record in the 12-bit mode (two stereo sounds)
To record in the 16-bit mode (the one stereo sound
with high quality)
To display the remaining tape:
• for about eight seconds after setting the POWER
switch to VCR or CAMERA and inserting a
cassette, then your camcorder calculates the
remaining amount of tape
• for about eight seconds after setting the POWER
switch to VCR or CAMERA and DISPLAY/
TOUCH PANEL is pressed
• for about eight seconds after setting the POWER
switch to VCR and is pressed
To always display the remaining tape indicator
POWER
switch
VCR
CAMERA
VCR
CAMERA
VCR
VCR
VCR
CAMERA
VCR
CAMERA
VCR
CAMERA
VCR
CAMERA
VCR
CAMERA
Notes on the LP mode
•When you record a tape in the LP mode on your camcorder, we recommend playing the tape on your
camcorder. When you play back the tape on other camcorders or VCRs, noise may occur in pictures
or sound.
•When you record in the LP mode, we recommend using a Sony Excellence/Master mini DV cassette
so that you can get the most out of your camcorder.
•You cannot make audio dubbing on a tape recorded in the LP mode. Use the SP mode for the tape to
be audio dubbed.
•When you record in the SP and LP modes on one tape or you record some scenes in the LP mode, the
playback picture may be distorted or the time code may not be written properly between scenes.
Notes on AUDIO MODE
•You cannot dub audio sound on a tape recorded in the 16-bit mode.
•When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance in AUDIO MIX.