Sony DCR-PC101E - Инструкция (Страница 248)

248
Icon/item
VCR SET
HiFi SOUND
AUDIO MIX
A/V t DV OUT
NTSC PB
LCD/VF SET
LCD B.L.
LCD COLOUR
VF B.L.
Mode
z STEREO
1
2
——
z OFF
ON
z ON PAL TV
NTSC 4.43
z BRT NORMAL
BRIGHT
——
z BRT NORMAL
BRIGHT
Meaning
To play back a stereo tape or dual sound track tape
with main and sub sound (p. 284)
To play back a stereo tape with the left sound or a
dual sound track tape with main sound
To play back a stereo tape with the right sound or a
dual sound track tape with sub sound
To adjust the balance between stereo 1 and stereo 2
(p. 137)
To output digital images and sound in analog
format using your camcorder
To output analog images and sound in digital
format using your camcorder (p. 243)
To play back a tape recorded in the NTSC colour
system on a PAL system TV
To play back a tape recorder in the NTSC colour
system on a TV with the NTSC 4.43 mode
To set the brightness on the LCD screen normal
To brighten the LCD screen
To adjust the colour on the LCD screen with –/+
To set the brightness on the viewfinder screen to
normal
To brighten the viewfinder screen
POWER
switch
VCR
VCR
VCR
VCR
VCR
CAMERA
MEMORY
VCR
CAMERA
MEMORY
VCR
CAMERA
MEMORY
Changing the menu settings
Note on NTSC PB
When you play back a tape on a Multi System TV, select the best mode while viewing the picture on
the TV.
Notes on LCD B.L. and VF B.L.
•When you select BRIGHT, battery life is reduced by about 10 percent during recording.
•When you use power sources other than the battery pack, BRIGHT is automatically selected.
Even if you adjust LCD B.L., LCD COLOUR and VF B.L.
The recorded picture will not be affected.
ST1 ST2
High intensity Low intensity