Beko CS 47100 - Инструкция (Страница 12)

Part 4: Operating the top burners
To obtain maximum efficiency
A correct use to burner results in gas saving
and better out put. Therefore we
recommend to use saucepans whose base
completely cover the flames. Four
saucepans with much smaller diameters
to be put auxiliary burner,use the pan
support adaptor.
If your cooker has flame failure
device on gas burners;
Flame
failure
device
In case of any flame
failures with any reasons
in the top burners, the
flame failure device
immediately cuts of
the gas flow. It is also a safety device for the
wrong use of the children. You should turn
the knob to the counter-clockwise direction
by pressing. You should ignite by pressing
the knob and wait for its ignition. You should
keep the knob at pressed position for 3-5
seconds after you see the flame around the
burner. Repeat the sequence of operations
if the flame does not continues.
Use of top gas burners
Turn the relevant knob by slightly pressing in
counter clockwise direction.
The large flame on the knob corresponds to
maximum capacity position and the small flame
corresponds to minimum capacity position.
Ignition by button
In models with ignition;
It provides automatic ignition.
When the button is pressed and released all
plugs spark at the same time. The ignition starts
at the burner through which the gas flows. If
an ignition does not occur, repeat the same
action. Holding the button at pressed position
does not provide ignition.
11