Beko ET 5614 HX - Инструкция (Страница 56)

5.3 Operating the ovens - controlled by single knob
* The oven/or grill knob can only be rotated clockwise
from the OFF position .
* Turn the oven on by rotating the oven knob
clockwise.
* Adjustment of the temperature in the oven is also
made by using this knob.
*The temperature values are written on the oven
control knob. The amber temperature indicator light
will glow until the pre-set temperature set using the
oven knob is reached. Once the temperature has been
reached, the amber light will go off and then cycle
on and off during use to maintain the pre-set
temperature. The table is a guide on cooking different
types of food with the related cooking temperatures.
* You can obtain additional energy savings by switching
off the oven five minutes prior to the end of the
cooking period, provided that the oven door is not
opened.
* Ensure you stand back from the appliance when
opening the oven door to allow any build up of steam
or heat to escape.
If, whilst cooking, steam produced comes in to contact
with cool surfaces on the outside of the appliance,
it will condense and produce water droplets.
This is quite normal and is not a fault.
Conventional Ovens
(_^): Oven lamp and warning lamps light
on. The heating elements are out of
operation.
(Temperature range): The lower and upper
heating element are on under the thermostat
control.
(□): Only the lower heating element is
controlled.
( Q): Upper heating element is controlled.
(D: Means only the grill heating element
is on.
You must bring to the heating control knob
to the maximum temperature.
(I
Turbo Ovens
(H): Oven lamp, warning lamps and
fan are on.
(Temperature range): The turbo
heating element is on under the
thermostat control.
(□): Means only the grill heater and
lamps are on.
You must bring to the heating control
knob to the maximum temperature.
3 Means both grill element and rôtisserie
ftinaion are on.
To set the knob "0" position after the stage
□, turn the knob in the counter-clockwise
direction.
Burning off the protective coating process.
In order to burn off the protective coating remove shelves and baking tray by turning your oven to 250°C
for to 30 minute periods without putting anything into it.
You must ensure this operation is conducted in a well ventilaled area.
21