Beko ET 5614 HX - Инструкция (Страница 54)

Release all the buttons and the timer will revert back to the
time of day.
The A symbol will remain lit to simify that an automatic cooking
programme has been set. The osymbol will go out.
When the auto cook programme starts the symbol will
then light up again.
Step 7 Turn the oven control to the required temperature.
‘
15.00
ooooo
O fffi T=r - +
At the end of the cook period the A symbol
will flash and an intemnittent bleeping sound
will be heard. The o symbol will go out.
The bleeping sound will continue for several
minutes unless cancelled (see Step 6). The
A symbol will continue to flash until the
timer is returned to manual operation (see
below).
steps Press the fifi cook period button to cancel the
bleeping sound.
Step 9 Turn the oven control to the OFF position.
Step 10 Press the f^ook period and T^end time buttons
together to return th^oven to manual operation. The A symbol
will go out and the t_r symbol will light up.
Notes:
When cooking automatically the cook period can be checked
at any time by simply pressing the tffj" cook period button
and thelsioT end time button.
To cancel the auto cookingprogramme before or after auto
cooking starts, press the'O' cook period and 1^end time
buttons together. This will return the cooker to manual
operation.
(b) To set the timer to switch ON immediateiy and OFF
automatically after a set cook period.
Step 1 Check that the correct time of day is set. If not follow
instructions for setting the time of day.
Step 2 Place food onto the correct shelf position in the oven
and close the oven door.
Step 3 Turn the oven control to the required temperature.
Step 4 Press and hold the iffi cook period button, the display
will read 0.00 and the ^ symbol will light up.
With the cook period button still held set the required cook
period using the "+" and " buttons the A symbol will light
up. e.g. 1 hour 30 minutes.
Note: The cook period is the length of time the food requires
to cook.
19