Sony CCD-TRV77E - Инструкция (Страница 83)

83
Customizing Your Camcorder
Выполнение индивидуальных установок на видеокамере
Changing the MENU settings
Icon/item
REC MODE
ORC TO SET
ORC stands for “Optimizing the Recording Condition”.
Ò REMAIN
COUNTER
(CCD-TRV77E
only)
Mode
r SP
LP
r AUTO
ON
r NORMAL
TIME CODE
Meaning
To record in SP (Standard Play) mode
To increase the recording time to twice the SP mode
To automatically adjust the recording condition to
get the best possible recording. Press START/STOP
to start adjustment. Your camcorder takes about 10
seconds to check the tape condition and then
returns to the Standby mode.
To display the remaining tape bar:
• for about 8 seconds after your camcorder is
turned on and calculates the remaining amount
of tape
• for about 8 seconds after a cassette is inserted and
your camcorder calculates the remaining amount
of tape
• for about 8 seconds after ( is pressed in
PLAYER mode
• for about 8 seconds after DISPLAY is pressed to
display the screen indicators
• for the period of tape rewinding, forwarding or
picture search in the PLAYER mode
To always display the remaining tape indicator
To display the normal counter
To display the frame counter in the form of
“0:00:00:00”(p. 77). With the counter, you can edit
more precisely or check the total time of the
recorded section from the beginning of the tape.
POWER
switch
CAMERA
PLAYER
CAMERA
CAMERA
Notes on the LP mode
•When you record a tape in the LP mode on your camcorder, we recommend playing the tape on your
camcorder. When you play back the tape on other camcorders or VCRs, noise may occur in pictures
or sound.
•Noise may occur also when you play on your camcorder tapes recorded in the LP mode on other
camcorders or VCRs.
Notes on ORC setting
•Each time you eject the cassette, the ORC setting will be canceled. If necessary, reset the setting.
•You cannot use this setting on a tape with the red mark on the cassette exposed.
(i. e. the tape is write-protected)
•When you set ORC TO SET, a non-recorded section of about 0.1 seconds appears on the tape.
However, note that this non-recorded section disappears from the tape when you continue recording
from this section.
•To check if you have already set the ORC setting, select ORC TO SET in the MENU settings. “ORC
ON” is displayed if ORC TO SET is already set.
PLAYER
CAMERA