Инструкция по эксплуатации ZELMER 481
Страница 113
117
200 g
(500 ml)
20 g
(500 ml)
1 piece
(2 cm)
300 g
1/8
Product
Recommended
gear
Processing
time
(
×30
)
5
10 s
5
15 s
5
30 s
5
20 s
The processing time can be shortened depending how thick
the final product particles should be.
OPERATION WITH ICE CRUSHER
The appliance characteristics
Zelmer food processor is equipped with the ice crusher which
is used for crushing ice and e.g. frozen fruit.
ATTENTION! You can use the crusher only with the
container and lid of mini food processor!
Application of the accessories
Doublesided disc – is used for crushing, grinding ice and
frozen products. The disc is round, the blades are double-
sided. One side, which we recognize by the applied plastic
fifteen-pointed star, fig.
33 A
is used for first level grinding
„I” (smaller particles of grinded product), the other side is
used for second level grinding „II” (bigger particles of grinded
product) and it is marked with sevenŁpointed star fig
33 B
.
Spindle
36
– is used for fixing the disc.
Preparation of the ice crusher
ATTENTION! Before assembling and disassembling
the food processor motor drive of the ice crusher,
make sure that the supply cord plug is disconnected
from the mains supply outlet.
Wash the parts in contact with processed product before
first usage.
Operate the mixer so, that the closed/open markings
located on the appliance are well visible.
Operation with ice crusher (fig. K)
1
Place the base
38
on firm, flat and dry surface.
2
Insert the mini food processor container
37
in the
base
38
.
3
Place the disc for ice
33
on the spindle
36
(double -
sided disc), so that the blades provided for operation are on
the top.
4
Place the disc with the spindle inside the mini food
processor container
37
so that the pivot protruding from the
container is inserted into the spindle orifice.
5
Insert the ice crusher container
31
on the fasteners
of the mini food processor container, and then lock the ice
crusher container, turning it until you can feel it is blocked.
6
Place the processed products inside the container
31
not exceeding MAX level.
When you fill up the crusher container
31
with
appropriate amount of processed product (do not
exceed MAX level) center the spindle
36
(put in the
middle) to enable its proper coupling with the mini food
processor lid
30
.
7
Screw the lid of mini food processor
30
to food processor
drive (in clockwise direction), until you feel it is blocked.
Further excessive turning the lid of mini food
processor can lead to damage.
8
Place the mini food processor lid
30
on the container
31
together with drive inserting the projections in orifices placed
in the container, and turn the lid (in clockwise direction) until
it is definitely blocked.
9
Connect the plug into the mains supply outlet.
10
Start-up the appliance and engage the appropriate gear.
After operation, switch off the appliance and unplug it
●
from the socket.
Disassembling the ice crusher, proceeds reverse to its
●
assembling.
ATTENTION! The ice crusher blades are very sharp.
Be very careful during assembling, disassembling or
during cleaning.
ATTENTION! Never exceed the maximum level of the
ice crusher input.
ATTENTION! Never disassemble the lid from the
container before the disc stops rotating.
Operational tips
Maximum level of input of the ice crusher container
●
corresponds with the capacity of 450 ml.
Shake the appliance in case the products are clogged
●
over the disc.
In case the products get stuck to the inner wall of the
●
mini food processor container hindering or blocking
ejection of grinded product out of the upper container of
the ice crusher:
Switch off the appliance.
–
Remove the drive with the lid and container of ice
–
or – other products crusher.
Remove the products out of the mini food processor
–
walls.
Re-assemble the appliance - as defined above and
–
continue the operation.