Инструкция по эксплуатации ZELMER 481
Страница 109
113
Appliance elements
(Fig. A)
1
Mixer motor
2
Pusher button
3
Switch lever
4
Turbo button
5
Whisks or mixers sockets
6
Mixing adapter hole
7
Handle insert
8
Mixers: left / right with toothed bar
9
Whisks: left / right with toothed bar
10
Liquidising dics
11
Mixing attachment
12
Cup
13
Mixing cup
14
Doser
15
Lid
16
Knife cup
17
Stand (with scales type 481.67 or without scales – other
models)
18
Head
19
Grip knob
20
Fastening button
21
Blockade control (type 481.67)
22
Rotating bowl
23
Scraper blade
24
Blade
25
Display and scales keypad
26
Display
27
ON/OFF – the button to switch the scales off and on
28
Tarring knob TARE
29
Unit change button UNIT
30
Food processor lid with gearbox
31
Ice crusher container
32
Limiting ring
33
Double-sided disc of ice crusher for first level granulation
“I” (smaller size
A
) and second level granulation “II”
(bigger sizey
B
)
34
Mini food processor blade
35
Cover
36
Spindle
37
Mini food processor container
38
Mini food processor base
ZELMER mixers types
(Fig. B)
basic mixer equipment
additional equipment, which you can buy in shops
Device description
The mixer has 5 speed positions. The lever is used to set
●
up the particular rotation speed according to the numbers:
0, 1, 2, 3, 4, and 5 on pusher button, which helps to remove
(push out) the mixers or whisks from the mixer motor part.
Additionally, the drive has
●
„turbo” button which helps to
get the maximum rotation speed immediately, regardless
the speed set with the lever. Such buttons are placed
both on the right and left sides of the casing intended for
the convenience of both left and right-handed users. The
„turbo” button is automatically blocked in „0” position.
There are 2 sockets (holes), for whisks or mixers
●
assembling, placed on the bottom of the motor part.
The insert handle, placed on the top of the motor part, is
●
made of the material increasing the comfort of holding the
mixer motor part - SOFTTOUCH.
There is a hole for mixing adapter or mixing cup assembling
●
at the back of motor casing. The hole is covered with
a mobile cover.
Mixer start-up and position setting
(rotation speed)
(Fig. C)
1
Place the ON/OFF switch in the “0” position - the
leftmost position. Install the selected tool.
Plug in the appliance.
●
Switch on the appliance by sliding the switch to the right.
●
2
If you want to increase the rotation shift the lever in
position „5” direction, choose the desired rotation speed.
3
In order to increase the rotation immediately, regardless
set speed, press and hold one of „turbo” buttons (on the right
or left side of the casing).
When you want to return to the previously selected
●
speed release „turbo” button.
Preparing for operations
Operation with whisks or mixers (Fig. D)
The whisks are intended to whipping eggs white foam,
●
cream, rubbing yolks with sugar, cream and pancakes or
omelettes dough preparation.
The mixers are intended to work the rubbed dough, yeast
●
dough, cheeses cakes, imbirbread cakes, etc.
The whisks and mixers shall be assembled in sockets on
●
the bottom of the robot.
1
Press until you feel the refusal – when the clamps get
fastened.
When assembled improperly, the parts fall apart during
operation.
2
Insert the mixer or whisk with toothed bar into the socket
marked with a star.
The reverse assembling of the mixers can cause lifting
up the dough (taking the dough out of bowl).