Elenberg SPT-7090 - Инструкция (Страница 45)

45
INSTALLATION AND MAINTENANCE OF HEALTHY FILTER
1. Forcibly pull the panel for a specific angle from
the two ends of the front panel according to the
arrow direction. Then pull the air filter downwards
to remove it. (See Fig. a)
2. Mount the healthy filter onto the air filter, (as
shown in Fig. b). If the air filter cannot be installed,
please mount the healthy filter on the front case.
(as shown in Fig. c).
3. Mount the air filter properly along the arrow di-
rection in Fig. d, and then close the panel cover.
Cleaning and Maintenance
Take out the healthy filter before cleaning and reinstall it after cleaning ac-
cording to the installation instruction. Pay special attention to that silver ion filter
can’t be cleaned with water, while active carbon, photocatalyst, low tempera-
ture conversion (LTC) catalyst, formaldehyde eliminator, catechin or mite killing
filter can, but can’t with brush or hard things. Dry it in the shade or sun after
cleaning, but not by wiping.
Service Life
The healthy filter commonly has its usage lifetime for one year under normal con-
dition. As for silver ion filter, it is invalid when its surface becomes black (green).
This supplementary instruction is provided for reference to the unit with healthy
filter. If the graphics provided herein is different from the physical goods, the lat-
ter one shall prevail. The quantity of healthy filters shall be based on the actual
delivery.