Elenberg SPT-7090 - Инструкция (Страница 32)

32
General operation
1. After powered on, press ON/OFF button, the unit will
start to run. (Note: When it is powered off, the guide
louver of main unit will close automatically.)
2. Press MODE button, select desired running mode, or
press COOL mode to enter into the corresponding op-
eration directly.
3. Pressing +or - button, to set the desired temperature. (It
is unnecessary to set the temp. at AUTO mode.)
4. Pressing FAN button, set fan speed, can select AUTO
FAN, LOW, MID and HIGH.
5. Pressing button, to select the swing.
Optional operation
1. Press SLEEP button, to set sleep.
2. Press TIMER ON and TIMER OFF button, can set the
scheduled timer on
3. Press LIGHT button, to control the on and off of the dis-
playing part of the unit. (This function may be not avail-
able for some units)
4. Press TURBO button, can realize the ON and OFF of
TURBO function.
Blow function
This function indicates that moisture on evaporator of indoor unit will be blowed after
the unit is stopped to avoid mould.
1. Having set blow function on: After turning off the unit by pressing ON/OFF button
indoor fan will continue running for about 10 min. at low speed. In this period,
press blow button to stop indoor fan directly.
2. Having set blow function off: After turning off the unit by pressing ON/OFF button,
the complete unit will be off directly.
AUTO RUN
When AUTO RUN mode is selected, the setting temperature will not be displayed on
the LCD, the unit will be in accordance with the room temp. automatically to select
the suitable running method and to make ambient comfortable.
Turbo function
If start this function, the unit will run at super-high fan speed to cool quickly so that
the ambient temp. approachs the preset temp. as soon as possible.
Lock function
Press + and - buttons simultaneously to lock or unlock the keyboard. If the remote
controller is locked, the icon will be displayed on it, in which case, press any but-
ton, the mark will flicker for three times. If the keyboard is unlocked, the mark will
disappear.
Swing up and down
1. Press swing up and down button continuously more than 2s, the main unit will
swing back and forth from up to down, and then loosen the button, the unit will
stop swinging and present position of guide louver will be kept immediately.
SPECIAL FUNCTIONS