Operation of remote control – Инструкция по эксплуатации Elenberg SPT-7090
Страница 30
30
Names and functions of wireless remote control
Note: Be sure that there are no obstructions between receiver
and remote controller; Don’t drop or throw the remote control;
Don’t let any liquid in the remote control and put the remote
control directly under the sunlight or any place where is very hot.
ON/OFF button
Press this button, the unit will be turned on, press it once more,
the unit will be turned off. When turning on or turning off the
unit, the Timer, Sleep function will be canceled, but the pre-
setting time is still remained.
MODE button
Press this button, Auto, Cool, Dry, Fan
mode can be selected circularly. Auto
mode is default while power on. Under
Auto mode, the temperature will not
be displayed; The initial value is 25 ºC.
SLEEP button
Press this button, Sleep On and Sleep Off can be selected. Af-
ter powered on, Sleep Off is defaulted. After the unit is turned
off, the Sleep function is canceled. After Sleep function set
up, the signal of Sleep will display. In this mode, the time of timer can be adjusted.
Under Fan and Auto modes, this function is not available.
FAN button
Press this button, Auto, Low, Middle, High speed
can be circularly selected. After powered on, Auto
fan speed is default.
Under Dehumidify mode, Low fan speed only can
be set up.
CLOCK button
Press this button, the clock can be set up, signal blink and display. Within 5
seconds, the value can be adjusted by pressing + or - button, if continuously press
this button for 2 seconds above, in every 0.5 seconds, the value on ten place of
Minute will be increased 1. During blinking, repress the Clock button, signal will
be constantly displayed and it denotes the setting succeeded. After powered
on, 12:00 is defaulted to display and signal will be displayed. If there is signal
be displayed that denotes the current time value is Clock value, otherwise is
Timer value.
X-FAN button
Pressing X-FAN button in COOL or DRY mode, the icon is displayed and the in-
door fan will continue operation for 10 minute in order to dry the indoor unit even
though you have turned off the unit.
After energizing, X-FAN OFF is defaulted.
X-FAN is not available in AUTO, FAN or HEAT mode.
Note: X-FAN is the alternative expression of BLOW for the purpose of understand-
ing.
TURBO button
In Cool mode, press this button can turn on or turn off the Turbo function.
After turned on the Turbo function, its signal will be displayed. When switching the
OPERATION OF REMOTE CONTROL