Sulky Maxidrill TRW 4/6 m central metering unit - Инструкция (Страница 12)

Recommendations for use
Before start-up
GB
A
When drilling, it is absolutely essential to lift the machine up
when turning in the field.
It is not advisable to turn too tightly when drilling.
Sulky cannot be held liable in any way in the event of an
accident arising due to the use of the machine that does not
comply with the instructions.
The presence of stones, rocks, stumps or other
obstacles must be taken into account.
The drill must be driven appropriately.
The operating speed for minimum tillage drilling
must not exceed 12 km/h.
The operating speed when drilling directly and in
plots where there is vegetative cover must not
exceed 8 km/h.
Variations in the results of drilling and plant
emergence cannot be completely excluded in spite
of the care taken by Sulky in the design and
manufacture of this seed drill, even when it is used
in full compliance with the instructions.
The factors that may have an impact on the success
of direct and minimum tillage drilling are very
varied, and include:
- Seed quality (coatings, treatments, density, vigour,
germination rate, etc.)
- Problems with the structure or heterogeneity of
the soil, presence of pests (slugs, field mice).
Minimum tillage drilling requires a high level of
agronomic knowledge.
10
The MAXIDRILL TRW seed drill has been designed
and constructed for drilling all kinds of commonly
used seeds in a variety of different situations.
Nevertheless, it is essential to follow the
manufacturer’s recommendations and to work
carefully and sensibly.
The seed drill should only be used by skilled
operators.
It is possible that there will be occasions where the
ground is either too wet or too dry to use the drill
properly.
In some of these conditions, using your drill may
result in damage to the machinery or to the soil.
Sulky cannot be held responsible for damage
caused by improper use of the machine.
Any modification to the machine carried out
without Sulky’s approval will automatically
invalidate the manufacturer’s guarantee.
Minimum tillage drilling must be carried out on
level, firmly consolidated ground where the harvest
residues have been properly incorporated
beforehand.