Yamaha RX-V863 - Инструкция (Страница 72)

70
En
Advanced sound configurations
■ Selecting decoders for 2-channel
sources (surround decode mode)
Use this feature to play back sources with selected
decoders. You can play back 2-channel sources on multi-
channels.
Set the operation mode selector to F
AMP and
then press Q
SUR. DECODE repeatedly on the
remote control to select the desired surround
decoder.
You can select from the following modes depending on the
type of source you are playing and your personal
preference.
y
You can change the decoder parameter settings (see page 71). Set
the operation mode to FAMP and then press RPARAMETER
to display the decoder parameters in the OSD. Press 9k / n
repeatedly to select the desired decoder parameter and then press
9l / h repeatedly to change the value of the selected
parameter.
■ Decoder descriptions (SUR.)
y
When you select the surround decode mode for Dolby Digital, DTS or DTS 96/24 sources, this unit automatically selects “SURROUND
DECODE Dolby Digital”, “SURROUND DECODE DTS” or “SURROUND DECODE DTS 96/24” program.
Selecting decoders
Decoder Descriptions
Pro Logic Dolby Pro Logic processing for any sources.
PLIIx Movie
PLII Movie Dolby Pro Logic IIx (or Dolby Pro Logic II) processing for movie sources. The Pro Logic IIx
decoder is not available when “SUR.B L/R SP” is set to “NONE” ( see page 78 ).
PLIIx Music
PLII Music Dolby Pro Logic IIx (or Dolby Pro Logic II) processing for music sources. The Pro Logic IIx
decoder is not available when “SUR.B L/R SP” is set to “NONE” ( see page 78 ).
PLIIx Game
PLII Game Dolby Pro Logic IIx (or Dolby Pro Logic II) processing for game sources. The Pro Logic IIx decoder
is not available when “SUR.B L/R SP” is set to “NONE” ( see page 78 ).
Neo:6 Cinema DTS processing for movie sources.
Neo:6 Music DTS processing for music sources.