Two knobs, I — i – Инструкция по эксплуатации Beko CS 52010
Страница 56
Внимание! Текст в этом документе был распознан автоматически. Для просмотра оригинальной страницы Вы можете воспользоваться режимом "Оригинал".
5.4 Operating the ovens- controlled by
Oven heating control knob
This knob is used together with the
"function selection"
knob. Select the desired stage with the
"function
selection"
knob. Then rotate the "oven heating control"
knob clockwise. The lamp and the heating elements in
conjuction with the stage you have selected, or the fan
will come on line. The temperature in the oven shall be
sensed by the thermostat. The thermostat switches off
the heating element and the thermostat light when the
set temperature level is reached inside the oven. When
the temperature falls below thermostat comes back on
line and the thermostat light illuminates. This way, the
set
temperature
level
is
maintained
throughout
the
cooking period.
Function selection knob
This knob allows you to select functions and carry out
checks. The functions and their stages are explained
below. In order to operate the stages, you need to bring
the
"function
selection"
knob
together
with
the
"oven
heating control" knob to the desired temperature degree
and adjust the timer if there is. If your cooker has timer;
refer to the description of timer usage.
Burning off the protective coating process.
In order to burn off the protective coating remove shelves
and baking tray by turning your oven to 250°C in ©
position for to 30 minute periods without putting anything
into it. You must ensure this operation is conducted in
a wall ventilated area.
two knobs
The stages of the function
selection knob for conventionai
ovens
Oven lamp light on. The heating
elements are out of operation.
I
—
I
Upper and lower heating elements
t J are on.
It provides to cook the both sides of
the meal at the same level.
□
Lower heater is on.
You can use this position, if you want
to have the bottom side of your meal
cooked better.
□
Upper heater is on. You can use this
position, if you want to have the top
side of your meal cooked better.
Means only the grill heater is on.
You must bring to the heating control
knob to the maximum temperature.
The stages of the function
selection knob for conventionai
ovens
Upper and lower heating elements
I — I
are on.
It provides to cook the both sides of
the meal at the same level.
□
Lower heater is on.
You can use this position, if you want
to have the bottom side of your meal
cooked better.
□
Upper heater is on. You can use this
position, if you want to have the top
side of your meal cooked better.
Means only the grill heater is on.
You must bring to the heating control
knob to the maximum temperature.
Means, both grill heater and rôtisserie
function are on.
You must bring to the heating control
knob to the maximum temperature.
22