Beko CS 52010 - Инструкция (Страница 53)

Release all the buttons and the tinner will revert back to the
time of day.
The A symbol will remain lit to signify that an automatic
cooking programme has been set. The symbol will go out.
When the auto cook programme starts the & symbol will
then light up again.
Step 7 Turn the oven control to the required temperature.
‘
15.00
ooooo
O O T=r - +
At the end of the cook period the A symbol
will flash and an intermittent bleeping sound
will be heard. The symbol will go out.
The bleeping sound will continue for several
minutes unless cancelled (see Step 6). The
A symbol will continue to flash until the
timer is returned to manual operation (see
below).
Step 8 Press the "iffi cook period button to cancel the
bleeping sound.
Step 9 Turn the oven control to the OFF position.
Step 10 Press the "iffi cook period andl^end time buttons
together to return the oven to manual operation. The A
symbol will go out and the ^ symbol will light up.
Notes:
When cooking automatically the cook period can be checked
at any time by simply pressing the -iffj- cook period button
and thell^ end time button
To cancel the auto cooking programme before or after auto
cooking starts, press the f^ook period and ll^end time
buttons together. This will return the cooker to manual
operation.
(b) To set the timer to switch ON immediateiy and OFF
automaticaiiy after a set cook period.
Step 1 Check that the correct time of day is set. If not follow
instructions for setting the time of day.
Step 2 Place food onto the correct shelf position in the oven
and close the oven door.
Step 3 Turn the oven control to the required temperature.
Step 4 Press and hold the "iffi cook period button, the
display will read 0.00 and the ^ symbol will light up.
With the cook period button still held set the required cook
period using the "+" and " buttons the A symbol will light
up. e.g. 1 hour 30 minutes.
Note: The cook period is the length of time the food requires
to cook.
19