Beko CS 52010 - Инструкция (Страница 50)

Operating the clock/programmer
^ The timer display is in 24 hour clock format.
Ensure that the correct time of day is always set
before using your cooker.
iM
A will light:
- When the timer is first
turned on it will flash. (It
should go out when the
time of day is set).
- When an Auto Cooking
programme has been set.
18.00
ooooo
O "iffi — +
The clock must be set before the oven can be
operated.
r ^
This "Cookpot" symbol will light up either.
J
- When the cooker is in "Manual Mode".
- When you press the iffj Cook Period button and set a
length of time for an Automatic Cooking programme.
iffj symbol will light up during Automatic Cooking.
— 0 will light up when you select a Minute Minder period
and will remain on for the period set.
O minute minder
Here you can set a time period of up to 23 hours and 59
minutes that will count down.
When it reaches zero the timer will bleep.
e.g. If you set 20 minutes, the timer will start bleeping 20
minutes later.
////
*—^ cook period
Cook Period is the actual length of time for which, the
timer will switch the oven on as part of an "Automatic
Cooking" programme.
e.g. If you set 2 hours, the food will be cooked for 2 hours.
TsTOPTend time
The time of day at which you want an automatic cooking
programme to end.
e.g. If you set a cook period for 2 hours, and end time of 11:00.
The timer will switch the oven on at 9:00 and turn the oven off
at 11:00. You will hear a bleep at 11:00 to indicate that the
automatic cooking programme has finished.
Notes
- When setting an automatic cooking programme you will
need to set the oven control to the required temperature when
you set the timer.
- If an automatic cooking programme has been set the oven
will only operate during the pre-programmed time.
"+" and
Used to adjust the various timer function settings.
- Used to adjust pitch of audible tone.
16