Panasonic NN-GT352 - Инструкция (Страница 18)

English
Operation
(Timer Setting)
- Eng-15-
Timer Setting (Kitchen Timer/Standing Time/Delay Time)
This feature allows you to program standing time after cooking is completed and to program the oven as a minute or 10 sec-
onds timer or program delay start.
To use as a Kitchen Timer: Example: To count 5 minutes
1. Press once. 3. Press.
Time counts down without
operating oven.
2. Set desired amount of time.
(up to 99 minutes and 50 seconds.)
To Set Standing Time: Example: To stand for 5 minutes after cooking (3 mins. at Medium)
1. Press 3 times.
Set the desired
cooking program.
(See page 7 for
directions.)
5. Press.
Cooking starts. After
cooking, standing time
will count down without
operating oven.
2. Press 3 times.
Set the desired
cooking time.
3. Press once. 4. Press 5 times.
Set desired amount
of standing time.
(Up to 99 minutes
and 50 seconds.)
To Set Delay Time: Example: To start cooking 5 minutes later (3 mins. at Medium)
1. Press once. 5. Press.
Delayed time counts
down. After delay time,
cooking will start.
2. Press 5 times.
Set desired amount
of delay time.
(up to 99 minutes
and 50 seconds.)
3. Press 3 times.
Set the desired
cooking program.
(See page 7 for
directions.)
4. Press 3 times.
Set the desired
cooking time.
Notes:
1. If oven door is opened while Standing Time, Delay Time or Kitchen Timer has been set, the time in the display window will
continue to count down.
2. Delay Time and Standing Time can not be programmed before any Auto control Function. This is to prevent the standing tem-
perature of the food from rising before defrosting or cooking begins. A change in the starting temperature could cause inaccu-
rate results.
3. When using Standing time or Delay time, it's up to 2 Power stages.
5 times
3 times 5 times
5 times 3 times
English