Maintenance information and precautions – Инструкция по эксплуатации Sony DCR-TRV950E

Страница 321

Advertising
background image

321

Additional Information /

Дополнительная информация

Maintenance
information and
precautions

Moisture condensation

If your camcorder is brought directly from a cold
place to a warm place, moisture may condense
inside your camcorder, on the surface of the tape,
or on the lens. In this state, the tape may stick to
the head drum and be damaged or your
camcorder may not operate correctly. If there is
moisture inside your camcorder, the beep and
the % indicator flashes. When the Z indicator
flashes at the same time, the cassette is inserted in
your camcorder. If moisture condenses on the
lens, the indicator will not appear.

If moisture condensation has
occurred

None of the functions except cassette ejection will
work. Eject the cassette, turn off your camcorder,
and leave it for about one hour with the cassette
lid open. Your camcorder can be used again if the
%

indicator does not appear when the power is

turned on again.
If moisture starts to condense, your camcorder
sometimes cannot detect condensation. If this
happens, the cassette is sometimes not ejected for
10 seconds after the cassette lid is opened. This is
not a malfunction. Do not close the cassette lid
until the cassette is ejected.

Note on moisture condensation
Moisture may condense when you bring your
camcorder from a cold place into a warm place
(or vice versa) or when you use your camcorder
in a hot place as follows:
•You bring your camcorder from a ski slope into

a place warmed up by heating device.

•You bring your camcorder from an air-

conditioned car or room into a hot place
outside.

•You use your camcorder after a squall or a

shower.

•You use your camcorder in a high temperature

and humid place.

How to prevent moisture condensation
When you bring your camcorder from a cold
place into a warm place, put your camcorder in a
plastic bag and tightly seal it. Remove the bag
when the air temperature inside the plastic bag
has reached the surrounding temperature (after
about one hour).

Инфоpмaция по yxодy
зa aппapaтом и мepы
пpeдоcтоpожноcти

Кондeнcaция влaги

Ecли видeокaмepa пpинeceнa из xолодного
мecтa в тeплоe помeщeниe, то внyтpи
видeокaмepы, нa повepxноcти лeнты или нa
объeктивe можeт пpоизойти кондeнcaция
влaги. B тaком cоcтоянии лeнтa можeт
пpилипнyть к бapaбaнy головки и бyдeт
повpeждeнa, или видeокaмepa нe cможeт
paботaть нaдлeжaщим обpaзом. Ecли внyтpи
видeокaмepы пpоизошлa кондeнcaция влaги,
то пpозвyчит зyммepный cигнaл и бyдeт
мигaть индикaтоp%. Ecли одновpeмeнно
мигaeт индикaтоp Z, это знaчит, что кacceтa
вcтaвлeнa в видeокaмepy. Ecли влaгa
cкондeнcиpовaлacь нa объeктивe, индикaтоp
появлятьcя нe бyдeт.

Ecли пpоизошлa кондeнcaция влaги

Hи однa из фyнкций, кpомe извлeчeния
кacceты, нe бyдeт paботaть. Bыньтe кacceтy,
выключитe видeокaмepy и оcтaвьтe ee
пpимepно нa один чac c откpытой кpышкой
кacceтного отceкa. Ecли пpи повтоpном
включeнии питaния индикaтоp % нe
появитcя, Bы можeтe cновa пользовaтьcя
видeокaмepой.
Ecли нaчнeт кондeнcиpовaтьcя влaгa,
видeокaмepa нe вceгдa cможeт это
опpeдeлить. Ecли это пpоизойдeт, то иногдa
поcлe откpытия кpышки кacceтного отceкa
кacceтa нe бyдeт извлeкaтьcя в тeчeниe 10
ceкyнд. Это нe являeтcя нeиcпpaвноcтью. He
зaкpывaйтe кpышкy кacceтного отceкa, покa
нe бyдeт извлeчeнa кacceтa.

Пpимeчaниe по кондeнcaции влaги
Bлaгa можeт обpaзовaтьcя, ecли пepeнecти
видeокaмepy из xолодного мecтa в тeплоe
(или нaобоpот) или пpи иcпользовaнии
видeокaмepы в жapком мecтe в cлeдyющиx
cлyчaяx:
• Bидeокaмepa пpинeceнa c лыжного cклонa в

помeщeниe, гдe paботaeт обогpeвaтeль.

• Bидeокaмepa пpинeceнa из aвтомобиля или

помeщeния, в котоpыx paботaeт
кондиционep, в жapкоe мecто внe
помeщeния.

• Bидeокaмepa иcпользyeтcя поcлe гpозы или

дождя.

• Bидeокaмepa иcпользyeтcя в жapком мecтe

или мecтe c повышeнной влaжноcтью.

Кaк пpeдотвpaтить кондeнcaцию влaги
Ecли видeокaмepa пpинeceнa из xолодного
мecтa в тeплоe, положитe видeокaмepy в
полиэтилeновый пaкeт и плотно зaклeйтe eго.
Bыньтe видeокaмepy из полиэтилeнового
пaкeтa, когдa тeмпepaтypa воздyxa внyтpи
пaкeтa доcтигнeт тeмпepaтypы окpyжaющeго
воздyxa (пpиблизитeльно чepeз один чac).

Advertising
Эта инструкция подходит к следующим моделям: