Types of trouble and how to correct trouble others – Инструкция по эксплуатации Sony DCR-TRV950E
Страница 296
296
Types of trouble and how to correct trouble
Others
Symptom
Cause and/or Corrective Actions
• The cassette has no cassette memory.
c
Use a cassette with cassette memory (p. 154).
• The cassette memory is full.
c
Erase unwanted titles (p. 157).
• The cassette is set to prevent accidental erasure.
c
Slide the write-protect tab so that red portion is not visible
(p. 34).
• The tape has a blank portion between recorded portions.
c
Superimpose the title to recorded positions (p. 155).
• The cassette has no cassette memory.
c
Use a cassette with cassette memory (p. 160).
• The cassette memory is full.
c
Erase unwanted data (p. 157, 162).
• The cassette is set to prevent accidental erasure.
c
Slide the write-protect tab so that red mark is not visible
(p. 34).
• The input selector on the VCR is not set correctly.
c
Check the connection and set the input selector on the VCR
again (p. 126)
• The camcorder is connected to DV equipment of other than
Sony using the i.LINK cable.
c
Set it to IR (p. 134).
• You have attempted to set a programme on a blank portion of
the tape.
c
Set the programme again on a recorded portion (p. 138).
• The camcorder and the VCR are not synchronised.
c
Adjust the synchronisation (p. 136).
• The IR SETUP code is incorrect.
c
Set the correct code (p. 130).
• Setting programme on a blank portion of the tape is attempted.
c
Set the programme again on a recorded portion (p. 205).
• COMMANDER is set to OFF in the menu settings.
c
Set it to ON (p. 279).
• Something is blocking the infrared rays.
c
Remove the obstacle.
• The batteries are inserted with + and – incorrectly matching +
and – inside the battery compartment.
c
Insert the batteries correctly (p. 341).
• The batteries are dead.
c
Insert new ones (p. 341).
• DISPLAY is set to V-OUT/LCD in the menu settings.
c
Set it to LCD (p. 280).
The title is not recorded.
The cassette label is not recorded.
Digital program editing to a tape
does not function.
Digital program editing to a
“Memory Stick” does not function.
The Remote Commander supplied
with your camcorder does not work.
The picture from a TV or VCR does
not appear even when your
camcorder is connected to output on
the TV or VCR.