ZELMER ZME8072EE - Инструкция (Страница 51)

51
ME-003_v02
STARTING/PAUSING/CANCELLING A FUNCTION
1 If the cooking time has been set, press the button to start cooking. If the cooking
has been interrupted, press the button to continue.
2 During the cooking process press the button to pause.
3 Press the button twice to cancel cooking.
ENERGY SAVING FUNCTION
1 In standby mode press the button for 3 seconds – the LED display will turn off
and go into energy saving mode.
2 If there will no action performer in the standby mode, the LED display will turn off and
go into energy saving mode.
3 To leave the energy saving node all you have to do is push any button or turn the dial.
SPECIFICATIONS
1 Firstly you will hear a single sound signal after turning the dial.
2 If the cooking programmer is set, and within the next 5 minutes the button is not
pressed, the current time will be displayed. The setting will be cancelled.
3 A sound signal is heard after a successful push of a button. After an unsuccessful push
there will be no answer.
4 A sound signal will be heard 5 times as a reminder that the cooking has ended.
Cleaning and maintenance
OUTSIDE SURFACE
Wipe the oven with water and a little of dishwashing liquid. Dry with a soft cloth.
Caustic and abrasive agents are not suitable. If any such substances meet the front of the
oven, they should be immediately washed off with water.
ATTENTION: Minor differences in the coloring of the oven front are caused by use
of different materials, such as plastics, glass and metal.
Ovens with stainless steel fronts – remove immediately any stains caused by stone, fat,
flower or egg white. Use stainless steel care agents. Before using an agent on the surface,
try it first on a smaller are that is not visible.
Ovens with aluminum fronts – use a mild windowpane detergent. Wipe the surface with
vertical moves, adding no pressure to the movement by using a windowpane or microfiber
cloth. Aggressive cleaning agents, coarse sponges and cloths are not suitable for the
task.
ATTENTION: In order to clean the oven, it should be turned off and cold. Due to
safety reasons it is not advisable to clean the oven with steam or by using high
pressure. Aggressive cleaning agents, coarse sponges and cloths are not suitable
for the task.
ATTENTION: Do not use any scrapers, coarse sponges or abrasive agents.
Never use steam or high-pressured sprays to clean the oven.
●
Never use abrasive agents, scourers or sharp objects to clean the oven door.
●
Stainless steel or enameled surfaces need to be cleaned with warm water with soap or
●
a special quality product. It is not advisable to use abrasive cleaning agents, as they
can damage the surface and the design of the oven. It is important to clean. The oven
after each use. Melted grease accumulates on the walls of the oven during cooking. It
may cause an unpleasant smell in the future or may even affect the dishes in the oven
Use hot water with detergent to clean the oven. Remember to rinse it thoroughly after
washing.
The stainless gridiron should be cleaned with detergents and metal scrapers. Glass
●
surfaces, such as the oven door and heating chamber may be cleaned only, if they
are cold. Any damages caused by negligence and ignoring the above rules are not
covered by the guarantee.
CATALYTIC SELF-CLEANING
(ZME8062EE, ZME8082EE, ZME8052EE, ZME8072EE)
Catalytic panel
The side walls of the oven may be equipped with catalytic panels.
ZME8062EE, ZME8082EE, ZME8052EE, ZME8072EE ovens are equipped with catalytic
panels.
The panel cleans itself during the work of the oven.
It is advisable at regular intervals to heat up the oven with no dishes inside – this will result
in the process of self-cleaning.
1 Remove all side objects from the oven.
2 Use warm water and dishwashing fluid to clean the bottom of the oven. Dry it
afterwards.
3 Use the traditional cooking function . Set the oven to 250°C. Turn off the oven
after 45 minutes.
4 After the oven is dry clean all the remaining stains by using a wet sponge.
ATTENTION: Do not use an oven cleaning agent to clean catalytic panels of the oven.
It may damage the panels.
Even if the color of enamel fades, this will in no way compromise the self-cleaning
properties of the panels.
CLEANING THE OVEN DOOR
To get a better access to the oven inside, you can take
the oven doors.
1 Open the door until horizontal position.
2 Move the hinges at the both sides to open position.
3 Holding the door at a 60-degree angle take it with both
hands, and pull out of the hinges.
If you touch the hinges when pulling out the door, you may
cut yourself.
To install the oven door:
1 Insert the hinges in the holes at both sides of the oven
and tilt the door down.
When the door will be in the proper position, you will see
the elements of hinges.
2 Close the handles.
3 Close the oven door.
Changing the light bulb inside the oven
In order to change the light bulb in the oven, unplug it
from the power supply, and wait for the oven to cool off, if
necessary. Unscrew the lampshade and then the light bulb.
Replace it with an identical one (230 V – 25 W) that may
withstand very high temperatures (300°C).
Accessories
Handles
Gridiron-shelves
A shelf for placing a grill pan, dishes,
baking tins and elements used for baking
or grilling.
Shelf bracket
A bracket with runners for right and left shelves
may be taken out to facilitate cleaning of side
walls of the oven.
All-purpose baking/roasting tin
For preparing larger amounts of food, such as
cakes, frozen dishes etc. or to collect grease/
gravy from meat.
Telescopic runners
(ZME8051EE, ZME8062EE, ZME8071EE,
ZME8082EE, ZME8052EE, ZME8061EE,
ZME8072EE, ZME8081EE)