Power supply, Operating the oven, Vents – Инструкция по эксплуатации ZELMER ZME8072EE

Страница 50

Advertising
background image

50

ME-003_v02

Power supply

Install a circuit-breaker near the oven in an easily accessible place. The distance between

the contacts must be at least 3 mm. Before connecting the cable to the power supply,

check if the network has sufficient power in relation to the maximum power drawn by the

oven according to the data given on the rating plate.

ATTENTION: During the installation process bear in mind the position of the power

cable. Avoid temperature over 50°C at any part of the cable. The oven meets the

safety standards established by the governing bodies.

The oven is safe to use, only if it was properly grounded according to binding

legal requirements for cable safety. You are responsible for grounding the oven

properly. The producer bears no responsibility for damages or injuries of people,

animals or property caused by improper grounding of the oven.

WARNING: Voltage and frequency are given on the rating plate. Cable and wiring

system must withstand the maximum power required for the oven, given on the

rating plate.

If you have any doubts, call in a qualified expert.

In order to connect the cable:

1

Unscrew the bolts holding the cable and three bolts of L-N-

2

Fasten the cables under the bolt heads.

Operating the oven

SETTING THE CLOCK

When the oven is plugged into the power source, you will see “00:00” on the display and

hear a single sound signal, after which the device will go into a standby mode.

1

Press the

button – you will see hours’ digits on the display.

2

Turn the

dial to set the right hour between 0-23.

3

Press the

button – you will see minutes’ digits on the display.

4

Turn the

dial to set the right minutes between 0-59.

5

Press the

button to finish setting the clock. The “:” will start flashing and the clock

will be set.

ATTENTION: The clock is in a 24 h mode. When setting cooking time below

60 minutes, set the longer time first, and then turn the dial backwards to the

desired time.

SETTING A FUNCTION

1

Turn the

dial to select the desired function. You will see a proper indicator

turn on.

2

Turn the

dial to set the temperature.

3

Press the

button to start the cooking process.

4

If you skip step 2, press the

button to confirm immediate start. Time will be set

automatically to 9 hours, and the automatic temperature will be given on the LED display.

ATTENTION:

1

Threshold values to set by the coding dial are the following:

0 - 30 min : 1 minute

30 min - 9 hours : 5 minutes

2

The threshold value for temperature setting is 5 degrees Celsius.

3

Turn the

dial to set the time for cooking during the process. Next press

the

button to start cooking. If you press

within the next 3 seconds, the

oven will go back to its previous time set and will continue cooking.

4

Turn the

dial to adjust the temperature during cooking. A proper

indicator will turn on. Next press the

button to start cooking. If you do

not press

within the next 3 seconds, the oven will go back to its previous

temperature and continue cooking.

INQUIRING FUNCTION

During cooking process, you can use inquiring function, after 3 seconds return to the

current working state.

1

During cooking mode, press

button to see the current time.

2

If the clock was set, press

button to ask for current time.

CHILDREN SAFETY FUNCTION

Locking: In standby mode press the

+

buttons simultaneously for 3 seconds.

You will hear a long sound signal meaning the children safety lock is on – the following
indicator will be on:

.

Unlocking: In lock mode press the

+

buttons simultaneously for 3 seconds. You

will hear a long sound signal meaning the children safety lock is off.

REMINDER FUNCTION

The oven has 9 hours reminder, this function will help remind you to start cooking in

a certain time from 1 minute to 9 hours. Only when oven in standby mode, the reminder

can be set. Follow below to set the reminder:

1

Press reminder setting button

.

2

Turn

to set the hour time of reminder.

3

Press reminder setting button

again.

4

Turn

to set minute time of reminder.

Note: After the set time, the oven buzzer will sound for 10 times, then

symbol

disappears on the screen to reminder you start cooking. You can cancel the

reminder during setting process by press stop button. If the reminder was set, you

can cancel it by press stop button twice.

Vents

ATTENTION: The fan works for 15 minutes after the oven has stopped working.

Vents

Advertising
Эта инструкция подходит к следующим моделям: