Troubleshooting – Инструкция по эксплуатации SINBO SBM 4712

Страница 28

Внимание! Текст в этом документе был распознан автоматически. Для просмотра оригинальной страницы Вы можете воспользоваться режимом "Оригинал".

Advertising
background image

PROBLEM:

Smoke from ventilation hole when baking

CAUSE:

Some ingredients adhere to the heat element or nearby, for the first use, oil

remained on the surface of heat element

SOLUTION:

Unplug the bread maker and clean the heat element, but be careful not to

burn you, during the first use, dry operating and open the lid.

PROBLEM:

Bread bottom crust is too thick

CAUSE:

Keep bread warm and leave bread in the bread pan for a long time so that water

is losing too much

SOLUTION:

Take bread out soon without keeping it warm

PROBLEM:

It is very difficult to take bread out

CAUSE:

Kneader adheres tightly to the shaft in bread pan

SOLUTION:

After taking bread out, put hot water into bread pan and immerge kneader

for 10 minutes, then take it out and clean.

PROBLEM:

Stir ingredients not evenly and bake badly

CAUSE 1.

Selected program menu is improper

SOLUTION 1.

Select the proper program menu

CAUSE 2.

After operating, open cover several times and bread is dry, no brown crust

color

SOLUTION 2.

Don't open cover at the last rise

CAUSE 3.

Stir resistance is too large so that kneader almost can't rotate and stir adequately

SOLUTION 3.

Check kneader hole, then take bread pan out and operate without load, if

not normal, contact with the authorized service facility.

PROBLEM:

Display "H:HH" after pressing "start/stop" button

CAUSE:

The temperature in bread maker is too high to make bread.

SOLUTION:

Press "start/stop" button and unplug bread maker, then take bread pan out

and open cover until the bread maker cools down

PROBLEM:

H ear the motor noises but dough isn't stirred

CAUSE:

Bread pan is fixed improperly or dough is too large to be stirred

SOLUTION:

Check whether bread pan is fixed properly and dough is made according to

recipe and the ingredients is weighed accurately

TROUBLESHOOTING

PROBLEM:

B read size is so large as to push cover

CAUSE:

Yeast is too much or flour is excessive or water is too much or environment

temperature is too high

SOLUTION:

Check the above factors, reduce properly the amount according to the true

reasons

- 27 -

Advertising