SINBO SBM 4712 - Инструкция (Страница 23)

1. If the display shows “H:HH” after you have pressed START/STOP button, (see below
figure 1) the temperature inside is still too high. Then the program has to be stopped.
Open the lid and let the machine cool down for 10 to 20 minutes.
2. If the display shows “E:EE” after you have pressed START/STOP button, (see below
figure 2) the temperature sensor is disconnected please check the sensor carefully by
Authorized expert.
WARNING DISPLAY
For the first use
The appliance may emit a little smoke and a characteristic smell when you turn it on for
the first time. This is normal and will soon stop. Make sure the appliance has sufficient
ventilation.
1. Please check if all parts and accessories are complete and free of damage .
2. Clean all the parts according to the latter section"Cleaning and Maintenance"
3. Set the bread maker in baking mode and bake empty for about 10 minutes. After
cooling it down clean once more.
4. Dry all parts thoroughly and assembly them, so the appliance is ready for using.
How to make bread
1. Place the pan in position, then turn it clockwise until they dick in correct position. Fix
the kneading blade onto the drive shafts. Turn the kneaders clockwise until they click
into place. It is recommended to fill holes with heat-resisting margarine prior to placing
the kneaders, this avoids the dough to stick below the kneaders and the kneaders could
be removed from bread easily.
2. Place ingredients into the bread pan. Usually the water or liquid substance should be
put firstly, then add sugar, salt and flour, always add yeast or baking powder as the last
ingredient. In case of heavy dough with high Rye or whole meal portion we advise to
reverse the order of ingredients. i.e. to fill in first the dry yeast and flour, and finally the
liquid to get a better kneading result.
3. With finger make a small indentation on one side of the flour. Add yeast to indentation,
Make sure it does not come into contact with the liquid ingredients or salt.
4. Close the lid gently and plug the power cord into a wall outlet.
5. Press the Menu button until your desired program is selected.
6. Press the COLOR button to select the desired crust color.
7. Press the LOAF SIZE button to select the desired size (750g or 900g).
Note: the weight of bread should not more than 900g.
- 22 -