Beko M 5604 CTX RU - Инструкция (Страница 53)

Release all the buttons and the timer will revert back to the time
of day.
The
A
symbol will remain lit to signify that an automatic cooking
programme has been set. The
Q
symbol will go out.
When the auto cook programme starts the
&
symbol will
then light up again.
Step 7 Turn the oven control to the required temperature.
At the end of the cook period the
A
symbol
*
15.00
will flash and an intermittent bleeping
sound will be heard. The
Ж
symbol will
r-\ go out. The bleeping souna will continue
n 'z, for several minutes unless cancelled (see
V "cj тэт “ T V.
Step 6j. The
A
symbol will continue to flash
until the timer is returned to manual
operation (see below).
Step 8 Press the iffi cook period button to cancel the
bleeping sound.
Step 9 Turn the
o/en
control to the OFF position.
Step 70 Press the -fffj cook period and
тает
end time
buttons together to return the oven to manual operation. The
A
symbol will go out and the symbol will light up.
Notes:
When cooking automatically the cook period can be
checked at any time by simply pressing the cook
period button and the
TTOT
end time button.
To cancel the auto cooking programme
before
or after auto
cooking starts, press the jffj cook period andWfT end
time
buttons
together. This will return the cooker to manual
operation.
(b) To set the timer to switch ON immediately and
OFF automatically after a set cook period.
Step 1 Check that the
correcf
time of day is set. If not follow
instructions for setting the time of day.
Step 2 Place food onto the correct shelf position in the oven
and close the oven door.
Step
3 Turn
the oven control to the required temperature.
Step 4 Press and hold the ÍÍÍJ cook period button, the
display will read 0.00
one/ foe
symbol will light up.
With the cook period button still held set the required cook
period using the
"+" and "
buttons the
A
symbol will light
up.
e.g.
I hour 30 minutes.
Note; The cook period is the length of time the food requires
to cook.
19