Beko CE 51110 - Инструкция (Страница 65)

A Part 9:
Gas converfion
Your cooker can operate both
Natural Gas and LPG. You can
convert by changing the gas
source and the top burner,
oven
ond g r i l l i n j e c t o r s . T h e
rep/ocemenf procedure o f the
injectors are explained below.
Call authorlxad Sarvha tor
gas converffon.
Replacement of the
fop bvrner rn/ectvr
Take off the burner head
and burner cap before
starting this procedure.
Then:
1. Remove the injector
inside the top burner with
a su(tob/e bit. Later, install
the new injector by covering
the injector threads
with leakage
preventing
material. thme failure
device
spark plug
Reduced Tap Flow
1. Ignite the burner that should be
adjusted, turn the knob to the reduced
position, pull and take the knob o f f .
2. W ith a screwdriver, make the tap
reduced flow adjustment from the
injector that is on the gas tap (only the
head is visible with the
bo/f sfiapej.
It is sufficient to tight to screw
com pletely, in butane/propane gas.
For the natural gas, you should turn the
screw counfer-c/ocfewise
once. The norm al length of a straight
flame in the reduced position
should be 6 - 7m m.
If the flam e is higher than the desired
position, turn the screw clockwise. If its
sma//er to the opposite.
For the last control of the burning of
the cooker, bring the cooker high-flame
and
reduced posifions and check
whether the flame is on or o f f .
31