Beko CE 51110 - Инструкция (Страница 55)

5.3 Operating the ovens - sontrolled by single knob
* The oven/or grill knob can only be rotated clockwise
from the OFF position .
* Turn the oven on by rotating the oven knob
clockwise.
* Adfustment of the temperafure in the oven is also
made by using this knob,
*The temperature values are written on the oven
control knob. The amber temperature indicator light
will glow until the pre-set temperature set using the
oven knob is reaciied. Once the temperature has
been reached, the am ber light will go off and then
cycle on and off during use to maintain the pre-set
tem perature. The table is a guide on cooking different
types of food with the related cooking temperatures.
* You can obtain additional energy savings by
switching off the oven five m inutes prior to the end
of the cooking period, provided that the oven door
is not opened.
* Ensure you stand back from the appliance when
opening the oven door to allow any build up of steam
or heat to escape.
If, whilst cooking, steam
produced comes in to contact
with cool surfaces on the oufside of the appliance,
it will condense and produce wafer droplets.
This is quite norm al and is not a fault.
Conventional Ovens
( ^): Oven lam p and warning lamps light
on. The heating elements are out of
operation.
(Temperafvre range): The lower and upper
heating element are on under the f/iermosfof
control.
(U ): Only the lower fjeofing elem ent is
controlled.
(
CZI
J* Idpper heating element is controlled.
( r^J* Orleans only the grill heating elem ent
is on.
You m ust bring to the heating control knob
to the maximum temperafure.
Turbo Ovens
J; Oven lamp, warning lamps
and fan are on.
(Jemperafure range): The turbo
heating element is on under the
therm ostat control.
( nj; A^eans only the grill fieoter
and lam ps are on.
You m ust bring to the heating control
knob to the maximum femperofure.
fisi) A^eons both grill element and rôtisserie
■lilf
jncrion are on.
To set the knob "0" position after the stage
□, furn file knob in the counter-clockwise
direction.
Burning off the protective coating process.
In order to burn off the protective coating remove shelves and baking tray by turning your oven to 250‘C
for to 30 minute periods without putting anything into it.
You must ensure this operation is conducted in a weii ventiiaied area.
21