Beko CE 51110 - Инструкция (Страница 41)

Part 4x
operating the top burners
4. f Operating the gas burners
To obtain maximum
efficiency
A correct use to burner
results in gas saving and
beifer out put. Therefore
we recom mend to use
saucepans whose base
com pletely cover the
flames. Four saucepans
with much smaller
diam eters to be put
auxiliary burner,use the
pan support adaptor.
If your cooker has fíame ^
failure device on gas burners;
In case of any flame failures with any
reosons in the top burners, the flam e
failure device imm ediately cuts of the
gas flow. It is also a safety device for
the wrong use of the children.
You should turn the knob to the counter-clockwise
direction by pressing. You should ignite by pressing
the knob and wait for its ignition. You should keep the
knob at pressed position for 3-5 seconds after you see
the flam e around the burner. Repeat the
sequence of
operations if the flam e does not continues.
Use of top gas burners
Turn the relevant knob by slightly
pressing in counter clockwise direction.
The large fíame on the knob corresponds
to m aximum capacity position and the
small flame corresponds to minim um
capacity
pos iff on.
Ignition by button
In models witít ignition;
If provides automotic ignition.
Wiien the button t's pressed and released all
plugs spark at the same time. The ignition starts
at the burner through which the gas flows. If
an ignition does not cx:cur, repeaf the same
action. Holding the button at pressed position
does not provide igm'fton.
Ignition from the knob
In models with ignition;
Vbu should turn the knob to counter-
clockwise diredion by pressing. The spark
occurs itself imm ediately on the burners till
you fake your hand off the knobs.
After you release the knob, if the ignition
does not continue repeat the same process
by keeping the knob pressed for 15 seconds.
If still no igniton occurs, wait for 1 minute
and repeat again.
W arning : Do not keep the knob in pressed
posrfion more than 15 seconds.
7