Sony DCR-IP5E - Инструкция (Страница 127)

127
Customizing Your Camcorder/
Bыполнeниe индивидyaльныx ycтaновок нa видeокaмepe
Icon/item
STEADYSHOT
VIDEOINPUT
NTSC PB
LCD COLOUR
VF B.L.
* STILL SET
PIC MODE
QUALITY
Changing the menu settings
Low intensity high intensity
* DCR-IP7E only
Notes on the SteadyShot function
The SteadyShot function may not work properly in the following cases:
•When the camera shake is excessive.
•When shooting in dark conditions.
•When the contrast of the subject and its background is low.
•When the subject is in vertical stripes.
•When shooting a moving subject.
•When attaching a conversion lens (optional).
If you cancel the SteadyShot function
The SteadyShot off indicator
appears. Your camcorder prevents excessive compensation for camera-
shake.
Notes on VF B.L.
When you select “BRIGHT”, the battery life is reduced by about 10 percent during recording.
When you use a power source other than the battery pack
VF B.L. is automatically set to BRIGHT.
POWER
switch
CAMERA
VCR
VCR
CAMERA
MEMORY
VCR
CAMERA
MEMORY
VCR
MEMORY
MEMORY
VCR
Meaning
To compensate for camera-shake.
To cancel the SteadyShot function. Natural pictures
are produced when shooting a stationary object with
a tripod.
To use the video plug of the A/V connecting cable
when recording from a player.
To use the S video plug of the A/V connecting cable
when recording from a player.
To play back a tape recorded in the NTSC colour
system on a PAL system TV.
To play back a tape recorder in the NTSC colour
system on a TV with the NTSC 4.43 mode.
To adjust the colour on the LCD screen with b/B.
To set the brightness on the viewfinder screen to
normal.
To brighten the viewfinder screen.
To not record continuously.
To record nine images continuously (p. 151).
To record still images in the fine image quality
mode.
To record still images in the standard image quality
mode.
Mode
z ON
OFF
z VIDEO
S VIDEO
z ON PAL TV
NTSC 4.43
——
z BRT NORMAL
BRIGHT
z SINGLE
MULTI SCRN
z FINE
STANDARD
(continued on the following page)