Sharp SJ-PV50H-G - Инструкция (Страница 39)

When using chemical rags, be sure to follow the accompanied
directions.
About the stainless tray
Salt adhered on the tray may cause rusting. In this case, clean the tray
with kitchen detergent (cream-type cleanser, etc.) as quickly as possible.
Do not use nylon scrubbing brushes. The tray may become scratched.
Notes
Clean once a year
There may be build-up of dust from convection of air.
Evaporating pan / Evaporating pan cover
Back of refrigerator, floor and walls
Turn the right and left adjustable feet until
they are off-ground and move the refrigerator. Wipe off dirt.
Water will be difficult to evaporate when dirty. Also remove dust from the inside of the evaporating pan cover.
Put the evaporating pan
on the radiator plate, and
then slide it in completely. Hold both sides of the evaporating
pan cover and angling upward.
Pull the evaporating pan out.
Fit the pawls of the evaporating pan
cover into the holes of the cabinet,
and then push the cover to attach.
Handle to the front
Hold level to
avoid spilling
Tab (right / left)
Water leakage and abnormal noise may occur when evaporation pan and cover are not properly mounted.
Removing Mounting
Evaporating
pan cover
Evaporating pan
Pull diagonally
upward
Push into main
unit holes
Wipe off dust
from the power
plug as well.
Dust and soil
Remove dust from the
holes on the lower
section of the back side
using a vacuum cleaner.
Adjustable foot
(right and left)
Evaporating pan cover
Do not use polishing powder, benzine, hot
water etc.
If undiluted detergent is used or soapy water is not wiped
off thoroughly, cracking of plastic parts can result.
Wipe any food oils adhered to plastic components
as they can cause cracking of the plastic surface.
39
Cleaning the Refrigerator
ENGLISH