Beko GG 15120 DX - Инструкция (Страница 74)

^ Installation
Before installation
Please note the product is packed
without the feet fitted, therefore please
ensure the feet are fitted as per the
instructions; see
Installation and
connection, page 14
before the
appliance is placed in its final position.
To ensure that critical air gaps are
maintained under the appliance, we
recommend that this appliance is
mounted on a solid base and that the
feet do not sink into any carpet or soft
flooring.
The kitchen floor must be able to carry
the weight of the appliance plus the
additional weight of cookware and
bakeware and food.
c:
E
E
E
o
to
^....
65
{Tim min ^
..........
CZZZD m
®
1
ii II
65mmiTih
clearance of 65 mm between the
appliance and any wall, partition or
tall cupboard.
It can also be used in a free
standing position. Allow a
minimum distance of 750 mm
above the hob surface.
(*) If a cooker hood is to be
installed above the cooker, refer to
cooker hood manufacturer’
instructions regarding installation
height (Min 65cm).
Movement of your appliance is
most easily achieved by lifting the
front as indicated in the drawing.
Open the oven door sufficiently to
allow a comfortable and safe grip
on the underside of the oven roof
avoid causing any damage to the
grill element or any internal parts
of the oven. Do not move by
pulling on the door handle or
knobs. Move the appliance a bit at
a time until placed in the position
required.
A safety distance must be left between
the appliance and the kitchen walls
and furniture. See figure (values in mm).
• It can be used with cabinets on
either side but in order to have a
minimum distance of 400 mm
above hotplate level allow a side
12 I EN